Manual

Selecting a Sound Mode 1

To ensure the best possible surround sound, be sure to complete the set up procedures described in "Setting Up for

Surround Sound" (starting on page 16) before using the sound modes. This is particularly important when using the 130

(Dolby) sound mode. When using the sound modes, SPEAKERS A are used. if SPEAKERS B are selected and a sound

mode is turned on, selection automatically switches to SPEAKERS A only.

Surrround operation

1 Press RECEIVER.

This sets the remote to select the sound mode.

(You can skipthis stepwhen usingthe controlson the receiver.)

2 Select the sound mode.

• For DO(Dolby) -_ Press DO

ATr

• For DSP modes ,,_ Press DSP MODE repeatedly

Each press changes the DSP mode as follows:

_ssHALL 1 -* HALL2 --_JAZZ -* DANCE's]

FC OFF"- THEATER 2 _- THEATER 1

EFFECT +/-

• The amount of effect of each DSP mode can be adjusted in the range of 10

to 90 (The default setting value is 70) by pressing EFFECT +/-.

• On the VSX-D508, Dolby Digital and Dolby Pro Logic sources can be used

simultaneously with DSP modes. (Refer to page 32 for VSX-D608)