Manual

[ Front Panel 1
VSX-D608
. "_-
PR,
s_uoul
I
E
l
O STANDBY/ON button
Press to switch the receiver on or put in standby.
STANDBY indicator
Lights when the receiver is in standby mode, (Please
note that this receiver consumes a small amount of
power (2.5 W) during the standby mode,)
CLASS button
Press repeatedly to switch the preset station classes,
(Refer to "Memorizing Frequency Tuned Stations"
page 38 and "Recalling the Memorizing Stations"
page 39)
MEMORY button
Press to memorize a preset station,
(Referto "Memorizing Frequency Tuned Stations" page 381
<_ MPX MODE button
Press to switch between auto stereo and monaural
('MONO") reception of FM broadcasts. When the
broadcast signal is weak, selecting "MONO" will
improve the sound quality.
TUNING SELECT button
Press to switch between STATION and FREQUENCY.
SPEAKERS button (VSX-D608)
Press repeatedly to switch between A and B speaker
systems as follows.
F A ---+ B ----_ A+B ---_ OFF --I
SPE'AKERS (A/B) buttons (VSX-D508)
Use to switch the corresponding speaker system on
or off. To listen to both speaker systems (A and B),
press the buttons so that both A and B appear in the
display (refer to Display _3_Speaker ndlcators page
24). Only A speakers are available when using
2#urround sound modes.
<ARB7157>
LOUDNESS button
Switches the loudness on or off, Use to raise the level
of the low and high frequencies so they can be more
easily heard when listening at low volumes.
BASS (+/-) button
Pressto adjust low frequencies in the range of _+6,
Display (Refer to page 24)
TREBLE (+/-) button
Used to adjusthigh frequencies in the range of -+6.
@
@
®
DIRECT button
Switches direct playback on or off, Use to bypass the
receiver's tone control circuitry or level control for
higher fidelity to the program source. When DIRECT
is ON, Dolby, DSP, LOUDNESS, DNR (VSX-D608 only)
and MIDNIGHT mode are automatically turned OFE
Remote sensor
Point the remote contro_ toward the remote sensor to
operate the receiver,
_3_/DTS button (VSX-D608)
Press repeatedly to select the standard Dolby/DTS
mode and the ADVANCED THEATER modes, (Refer to
page 30, 32)
i]rl button (VSX-D508)
Press to select the 13rl(Dolby) sound mode. This mode
automatically switches between Dolby Digital and
Do{by Pro Logic decoding according to the input
signal. (Refer to page 31 for more information about
Dolby Digital.)