Manual

IDisplay 1
3 r_. :_ _'_ ,_ (_, _ _ _ _1_ ,_Z) _,
! I_IJ ,LI_! F1
VSX-D6O8 only _ _5_ _ ,_ ,
SIGNAL SELECT indicators
Light to indicate the type of input signal selected for
the current component (refer to "Front Panel", _,
SIGNAL SELECT on pages 26, 27),
ANALOG : Lights when the analog audio signals are
selected.
DIGITAL : Lights when the digital audio signals are
selected.
AC-3 : Lights when a source with Dolby Digital signals
is played.
DTS IVSX-D608 only) : Lights when a source with
DTS audio signals is played.
_) Digital indicators
dts (VSX-D6O8 only) : Lights when DTS signals are
input. (DoIby/DTS mode is ON)
0_PRO LOGIC : When the Dolby mode on the receiver
is on, this indicator lights during 2 channel playback
of Dolby Digital sources.
r]0DIGITAL : When the Dolby mode on the receiver is
on, this indicator lights to indicate playback of a Dolby
Digital signal. However, rJrl PRO LOGIC lights during 2
channel playback of Dolby Digital,
SFC (DSP) mode indicator
Lights when the DSP mode or ADVANCED THEATER
mode (except for 5-D THEATER) is selected, (VSX-
D608)
Lights when the DSP mode is selected. (VSX-D508)
(Refer to "Surround modes" on page 28)
ATT indicator
Lights when ATr (refer to "Remote Control", _,
Number buttons on page 25) is used to reduce the
_evet of the input signal (available in ANALOG mode
only).
Overload indicator
When "ANALOG" is selected in SIGNAL SELECT, this
indicator lights to show that an excessively strong
signal is being processed. When this occurs, press
ATT on the remote control to attenuate the signal.
Also, when "DIGITAL" is selected in SIGNAL
SELECTOR, this indicator lights to show that a source
containing an excessive amount of information is
being processed (VSX-D608 only). When this occurs,
refer to pages 31 and 32.
(6_ 5-D THEATER indicator (VSX-D6O8 only)
Lights when 5 D THEATER is selected.
_7_MIDNIGHT indicator
Lights when the MIDNIGHT mode is on.
_) DNR indicator (VSX-D608 only)
Lightswhen the DtGITALNR is on,
(_) LOUDNESS indicator
Lightswhen loudnessison (referto "Front Panel",(_,
LOUDNESSon pages26, 27).
DIRECT indicator
Lights when directplayback is on (referto "Front
Panel", 5_,DIRECTon pages 26, 27).
Tuner indicators
STEREO: Lightswhen an FM stereobroadcastis
received in the auto stereo mode.
TUNED : Lights when a broadcast is received.
MONO : Lights when the tuner is set to receive FM
broadcasts in monaural.
H.P indicator
Lights when headphones are plugged in,
Speaker indicators
Light to indicate the current speaker system _refer to
"Front Panel", _, SPEAKERS (A!B) on pages 26, 27).
SP I_ A : Lights when speaker system A is selected.
SP _- B : Lights when speaker system B is selected.
_) Program format indicators
The following indicators light to show the channels
being p_ayed back.
L : Left front *_*_, C : Center *_, R : Right front *_*_,
LS : Left surround*_,S : Surround (mono) *_,
RS : Right surround *_
"1: Indicates 5.1ch Dolby Digital playback.
*2: Indicates Dolby surround playback.
(_ LFE indicator
LFE (Low Frequency Effects) indicator lights to
indicate that the program source contains an LFE
channel. The indicator to the left of LFE lights during
actual playback of the LFE signals (LFEsignals are not
present in all parts of the sound track).
1_ Character display
@ Volume level display
Displays the volume level. Volume level is maintained
even when the power is off. ---dE] indicates the
minimum level, and OdB indicates the maximum
level.
• Depending on the level settings for individual
channels, the MAX level can range between -10dB
and 0dB.
24
<ARB7157>