Manual

SUB WOOFER 0NIOFF setting mode

Sets whether the SUB WOOFER is used or not.

• Initial setting is "ON",

• Setting the front speaker size to "Small" in the SPEAKER setting mode automatically locks the sub woofer

in the "ON" position,

_" I{[

_:,LI _ .., Q l',J

Press z_ or _ to select sub woofer ON or OFF.

Cr_Sb_er frequency sett,ng mode

Setting speakers to "Small" in "SPEAKER setting mode" sends the respective channels' bass frequencies to the sub

woofer lot "Large" speakers). This function _ets you determine which frequencies will be sent to the sub woofer or

"Large" speakers.

• Initial setting is "100 Hz'.

• If all speakers (front, center, and surround) are set to "Large" in SPEAKER setting mode, crossover

frequency cannot be set. (_-_ appears in the display. )

. m JJ F_ - ,.,,u. E iOL:l

Press A or _7to specify the crossover frequency for your small

speakers (100 Hz, 150 Hz or 200 Hz).

100 Hz

Sends bassfrequencies below 100 Hztothe sub woofer(orLarge

speakers),

150 Hz

Sends bassfrequencies below150 Hzto the sub woofer(or Large

speakers).

200 Hz

Sends bass frequencies below 200 Hz to the sub woofer (or Large

speakers). We recommend setting 200 Hz when only small speakers

are used.

Dolby Digital and DTS audio sources include ultra-low bass tones. Set the LFE attenuator as needed to prevent the

ultra-low bass tones from distorting the sound from the speakers.

• Initial setting is "0 dB".

• When _=is selected (¢_ appears in the display), LFE is not available.

[ /:: E FIT T , L_"

Press _ or _' to set the attenuation level (0 dB, 10 dB

or _ dB (oo)).