Operation Manual
19
Operation
1 SOURCE (Power) button
This button turns on/off the power for PIONEER
components connected to the VSX-D209.
2 NUMBER/PLAYER COMMAND
buttons (see page 24, 27-29)
Use to select the radio frequency in tuner mode.
Also, you can use to contol PIONEER
components like CD players, cassette decks,
etc. according to the comands printed above the
button (4, 3, 7, etc.)
3 D.ACCESS/TOP MENU button (see
page 24, 29)
This button gives you direct access to radio
frequency input, allowing you to input a station
directly. In DVD mode this button brings you to
the top menu.
4 TEST TONE button (see page 15 & 23-
24)
Use this button to hear a test tone from each
speaker in turn to set the relative speaker
volumes. Also switches the BAND in TUNER
mode.
5 SURROUND button (see page 13,15,
20, 22)
Use this button to set up the surround sound
features of the VSX-D209. In particular, it's used
to select the type of center mode, turn on/off
subwoofer option and select delay time for each
speaker. Also used to start the process of
setting the effect levels
6 2 button (see page 15, 20)
Use to select a Dolby Pro Logic mode. Also used
to access Test Tone.
7 CH. SELECT button (see page 15-16, )
Used to start the process of setting the speaker
levels (see $ below).
8 RECEIVER STANDBY/ON button
Use to switch the receiver between on and
standby modes.
9 FUNCTION button
Use select the playback or recording source.
0 SOURCE SELECT keys
Use to put the remote control (NOT the
receiver) in the stated mode.
For other equipment controls, see Controlling
the Rest of Your System starting on page 27.
- CHANNEL/STATION +/– buttons (see
page.25, 27)
Use to select the station of memorized
frequencies or change channels on Pioneer-
made TVs.
= CLASS/MENU button (see page. 25, 29)
Use to switch between the three banks (classes)
of station memories.
~ 2 3 5∞ ( FQ +/–) & ENTER buttons
(see page.13, 14, 23)
Use these arrow buttons when setting up your
surround sound system (see page. 13-16). These
buttons are also used to control DVD menus/
options and for deck 1 of a double cassette deck
player. The FQ +/- buttons can be used to find
radio frequencies.
! MPX/SETUP MODE button (see page
23, 29)
Use to switch between auto stereo and mono
reception of FM broadcasts. If the signal is weak
then switching to MONO will improve the sound
quality. In DVD mode this button brings up the
SETUP menus.
@ DSP MODE button (see page 22)
Use to switch between the various DSP modes
available (HALL, JAZZ, DANCE, THEATER1,
THEATER2) and DSP off. Use to create different
surround sound effects from any stereo source.
# MUTING button
Use to mute all audio without affecting any of
the current sound settings.
$ +/– LEVEL buttons (see page 15, 16)
Use to set the relative speaker volumes for all
the speakers in your system (see 7 above).
% MASTER VOLUME +/– buttons
Use to set the overall listening volume.
^ FL DIMMER button
Use this button to make the fluorescent display
(FL) dimmer or brighter. There are three
brightness settings as well as an off setting.
CLASS
MENU
MPX
SET UP
D. ACCESS
TOP MENU
SOURCE
SOURCE SELECT
DVD
TAPE
CD
TUNER
TV CONT.
CH.
SELECT
FUNCTION
FL
DIMMER
RECEIVER
MD
CD-R
*&#@
TV VOL.
EFFECT
TV FUNC.
TEST
TONE
MUTING
MASTER
VOLUME
DSP MODESORROUND
2
!
!
Î
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
LEVEL
CHANNEL
STATION
$
$
ENTER
FQ
FQ
1234
56
90
78
1
9
8
7
6
5
4
3
2
0
^
%
$
#
@
!
~
=
-
Remote Control
Displays & Controls