User manual

108
Sisällysluettelo » Kytkennät » Soitto »
Etulevy» Takalevy» Kaukosäädin»
Asetukset »
108
Front Panel Rear Panel Remote
Contents
Connections
Playback
Setup
Updating the Firmware via Network
Check that the unit is turned on, and the connection to the Internet is secured.
Turn o the controller components (PC etc.) connected to the network.
Stop any playing Internet radio, USB storage device, or server content.
If the multi-zone function is active, turn it o.
If "HDMI CEC" is set to "On", set it to "O".
Press to display the Home screen. Next, select "System Setup" -
"Hardware" - "HDMI", press ENTER, select "HDMI CEC" and select "O".
* The descriptions may dier from the actual on-screen displays, however, operations
and functions are the same.
Update
1. Press .
The Home screen is displayed on the TV screen.
2. Select "System Setup" - "Miscellaneous" - "Firmware Update" - "Update via
NET" with the cursors in order, then press ENTER.
If "Firmware Update" is grayed out and cannot be selected, wait for a while
until it starts up.
If there is no updatable rmware, "Update via NET" cannot be selected.
3. Press ENTER with "Update" selected, and start update.
During the update, the TV screen may go black depending on the program
to be updated. In such a case, check the progress on the display of the
unit. The TV screen will remain black until the update is completed and the
power is turned on again.
When "Completed!" is displayed, the update is complete.
4. Press STANDBY/ON on the main unit to turn the unit into standby mode.
The process is completed, and your rmware is updated to the latest version.
Do not use on the remote controller.
If an Error Message is Displayed
If an error occurs, "- Error!" is displayed on the display of the unit. (""
represents an alphanumeric character.) Refer to the following descriptions and
check.
Error Code
-01, -10:
LAN cable not found. Connect the LAN cable properly.
-02, -03, -04, -05, -06, -11, -13, -14, -16, -17, -18, -20,
-21:
Internet connection error. Check the following:
Whether the router is turned on
Whether this unit and the router are connected via the network
Unplug and plug the power cords of this unit and the router. This may solve
the problem. If you are still unable to connect to the Internet, the DNS server
or proxy server may be temporarily down. Check the server operation status
with your Internet service provider.
Laitteistopäivitys verkon kautta
Varmista, että yksikössä on virta päällä ja yhteys internetiin toimii.
Kytke pois ohjaava, verkkoon kytketty komponentti (esim. tietokone).
Lopeta internetradio tai soitto USB-muistilaitteelta tai palvelinsisällöstä.
Jos multi-zone-toiminto on käynnissä, lopeta se.
Jos ”HDMI CEC” on tilassa ”On”, vaihda tilaksi ”Off”.
– Paina
ja avaa kotivalikko. Valitse “System Setup” - “Hardware” - “HDMI”,
paina ENTER, valitse “HDMI CEC” ja sille “Off”.
*
Näyttöruudun teksti saattaa näyttää erilaiselta, mutta käyttö ja toiminto ovat samat.
Päivitys
1. Paina
TV:n ruudulla näkyy kotivalikko.
2. Valitse kursoripainikkeilla “System Setup” - “Miscellaneous” - “Firmware
Update” - “Update via NET” ja paina ENTER.
Jos “Firmware Update” on harmaana ja sitä ei voi valita, odota sen
käynnistymistä hetki.
Jos käyttöjärjestelmään ei ole tarjolla uusia päivityksiä, ”Firmware
Uppdate” ei ole valittavassa.
3. Paina ENTER kun “Update” on valittuna, mikä käynnistää päivityksen.
Päivityksen aikana television ruutu voi muuttua mustaksi riippuen
päivityksestä. Katso silloin päivityksen tila yksikön näyttöruudusta.
Television ruutu pysyy mustana päivityksen valmistumiseen asti ja kunnes
virta kytketään taas päälle.
Näyttöruudussa näkyy ”Completed!” kun päivitys on valmis.
4. Paina keskusyksikön
STANDBY/ON ja sammuta yksikkö valmiustilaan.
Prosessi viimeistellään ja laitteistosi on päivitetty viimeisimpään versioon.
Älä käytä kaukosäätimen
.
Jos näyttöruudussa on virheilmoitus
Virheen sattuessa yksikön näyttöruudussa on ”
*
-
**
Error!” (
*
on jokin
numeromerkki). Tarkista seuraavasti:
*
-01,
*
-10:
Ethernetkaapelia ei tunnisteta. Kytke Ethernetkaapeli kunnolla.
*
-02,
*
-03,
*
-04,
*
-05,
*
-06,
*
-11,
*
-13,
*
-14,
*
-16,
*
-17,
*
-18,
*
-20,
*
-21:
virhe internetiin kytkeytymisessä. Tarkista seuraavat:
- onko reititin päällä.
- ovatko yksikkö ja reititin kytkeytyneenä verkkoon.
Sammuta virta ja yksiköstä ja reitittimestä ja kytke uudelleen päälle. Ongelma
voi ratketa. Jos et vieläkään pääse kytkeytymään internetiin, DNS-palvelin
tai etäpalvelin saattavat olla hetkellisesti pois käytöstä. Tarkista tila internetin
palveluntarjoajaltasi.