User manual

25
Connecting your equipment
03
Connecting your DVD player with no HDMI output
This diagram shows connections of a TV (with HDMI input) and DVD player (or other playback component with no
HDMI output) to the receiver.
HDMI
IN
1
IN
1
IN
(
TV
)
1
IN
(
DVD
)
1
-
1 6
IN
2
IN
3
IN
4
IN /MHL
6
(
SAT/CBL
)
ASSIGNABLE
BD IN
LAN
(
10/100
)
(
OUTPUT 5 V
0.6 A MAX
)
(
OUTPUT 5 V
0.9 A MAX
)
DC OUTPUT
for WIRELESS LAN
ASSIGNABLE
ASSIGNABLE
OPTICAL
COAXIAL
DVD
IN
P R
P B
Y
(
DVD
)
ASSIGNABLE
COMPONENT VIDEO
DVD
IN
OUT 2
(
HDZONE )
OUT 1
( CONTROL )
SELECTABLE
(
DVD
)
L
R
ZONE 2
OUT
IN
1
DVD
IN
P R P B
Y
(
DVD
)
ASSIGNABLE
COMPONENT VIDEO
HDMI
IN
1
IN
(
TV
)
1
IN
(
DVD
)
1
-
1 6
IN
2
IN
3
IN
4
IN /MHL
6
(
SAT/CBL
)
ASSIGNABLE
BD IN
LAN
(
10/100
)
(
OUTPUT 5 V
0.6 A MAX
)
(
OUTPUT 5 V
0.9 A MAX
)
DC OUTPUT
for WIRELESS LAN
ASSIGNABLE
ASSIGNABLE
OPTICAL
COAXIAL
OUT 2
(
HDZONE )
OUT 1
( CONTROL )
SELECTABLE
(
DVD
)
DVD
IN
L
R
ZONE 2
OUT
HDMI IN
ANALOG
RL
AUDIO OUT
DIGITAL OUT
COAXIALOPTICAL
Select one
VIDEO
VIDEO OUT
Select one
Y
PB
PR
COMPONENT VIDEO OUT
HDMI/DVI-compatible monitor
DVD player, etc.
! With factory default settings, video from the video cable or component cable will not be output from the HDMI
terminal. To output video, you must switch video input to the device connected with the video cable or compo-
nent cable and set V.CONV to ON (page 69 ).
! If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio cables
(page 24 ).
— When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI ARC (Audio
Return Channel) function, the sound of the TV can be input to the receiver via the HDMI OUT 1 terminal, so
there is no need to connect an audio cable. In this case, set ARC at HDMI Setup to ON (see HDMI Setup on
page 63 ).
! If you use an optical digital audio cable or RCA (analog) audio cable, you’ll need to tell the receiver which digi-
tal input you connected the player to (see The Input Setup menu on page 39 ).
! When the network function or iPod/USB input is selected with HDZONE, video connected with the video cable
or component cable is not output from the HDMI terminal. To output video, turn off HDZONE or set HDZONE to
some other input (page 72 ).