User manual

15
Controls and displays
02
Front panel
MASTER
VOLUME
STANDBY/ON
INPUT
SELECTOR
iPod iPhone
DIRECT
CONTROLSTATUS
ADVANCED
SURROUND
STANDARD
SURROUND
AUTO SURR/ALC/
STREAM DIRECT
PHONES
SPEAKERS CONTROL – MULTI-ZONE – ON / OFF BAND TUNER EDIT TUNE PRESET ENTER
iPod iPhoneHDMI
ADVANCED
MCACC
FL OFF
MCACC
SETUP MIC
5V 1 A
HDMI 5 INPUT
1 2 5
33
467 8
10 119 12
13 14 1615
1 u STANDBY/ON
This switches between standby and on for this receiver.
2 INPUT SELECTOR dial
Use to select an input function.
3 Indicators
! ADVANCED MCACC – Lights when EQ is set to ON in the AUDIO PARAMETER menu (page 67 ).
! FL OFF – Lights when “off” (nothing displayed) is selected with the display’s dimmer adjustment (page 73 ).
! HDMI – Blinks when connecting an HDMI-equipped component; lights when the component is connected
(page 24 ).
! iPod iPhone – Lights to indicate iPod/iPhone is connected (page 32 ).
4 MULTI-ZONE controls
If you’ve made MULTI-ZONE connections (page 30 ) use these controls to control the sub zone from the main
zone (page 72 ).
5 Character display
See Display on page 14 .
6 TUNER controls
! BAND – Switches between AM and FM radio bands (page 47 ).
! TUNER EDIT – Use with TUNE i/j, PRESET k/l and ENTER to memorize and name stations for recall
(page 47 ).
! TUNE i/j – Find radio frequencies (page 47 ).
! PRESET k/l – Find preset stations (page 47 ).
7 Remote sensor
Receives the signals from the remote control (page 10 ).
8 MASTER VOLUME dial
9 PHONES jack
Use to connect headphones. When the headphones are connected, there is no sound output from the speakers.
10 MCACC SETUP MIC jack
Use to connect the supplied microphone (page 37 ).
11 SPEAKERS
Use to change the speaker terminal (page 71 ).
12 Listening mode buttons
! AUTO SURR/ALC/STREAM DIRECT – Switches between Auto Surround (page 52 ), Auto Level Control and
Stream Direct mode (page 53 ).
! STANDARD SURROUND – Press for Standard decoding and to switch various modes (
Pro Logic, Neo:X,
Stereo etc.) (page 52 ).
! ADVANCED SURROUND – Use to switch between the various surround modes (page 53 ).
13 STATUS
Displays the IP address and information such as selected/set functions and the input signal on the display (page
73 ).
14 iPod iPhone DIRECT CONTROL
Change the receiver’s input to the iPod and enable iPod operations on the iPod (page 44 ).
15 iPod/iPhone terminals
Use to connect your Apple iPod/iPhone as an audio source (page 32 ), or connect a USB device for audio and
photo playback (page 32 ).
16 HDMI 5 INPUT terminal
Use for connection to a compatible HDMI device (Video camera, etc.) (page 33 ).