User manual

ManualsBrandsPioneer Manualsaudio & home theatreVSX-531D

Connecting your equipment

Placing the speakers

By connecting the left and right front speakers (L/R), the center speaker (C), the left and right

surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be

enjoyed.

To achieve the best possible surround sound, install your speakers as shown below.

Hints on the speaker placement

Where you put your speakers in the room has a big effect on the quality of the sound. The

following guidelines should help you to get the best sound from your system.

•

The subwoofer can be placed on the floor. Ideally, the other speakers should be at about

ear-level when you’re listening to them. Putting the speakers on the floor (except the

subwoofer), or mounting them very high on a wall is not recommended.

•

For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from

the TV.

•

If you’re going to place speakers around your CRT TV, use shielded speakers or place the

speakers at a sufficient distance from your CRT TV.

•

If you’re using a center speaker, place the front speakers at a wider angle. If not, place

them at a narrower angle.

•

Place the center speaker above or below the TV so that the sound of the center channel is

localized at the TV screen. Also, make sure the center speaker does not cross the line

formed by the leading edge of the front left and right speakers.

•

It is best to angle the speakers towards the listening position. The angle depends on the

size of the room. Use less of an angle for bigger rooms.

•

The optimal positioning for surround speakers is just above ear height. Make sure the

speakers don’t face each other. For DVD-Audio, the speakers should be more directly

behind the listener than for home theater playback.

•

Try not to place the surround speakers farther away from the listening position than the

front and center speakers. Doing so can weaken the surround sound effect.

CAUTION

•

Make sure that all speakers are securely installed. This not only improves sound quality,

but also reduces the risk of damage or injury resulting from speakers being knocked over

or falling in the event of external shocks such as earthquakes.

120

5.1 channel surround system:

Connecting your equipment

Placing the speakers

By connecting the left and right front speakers (L/R), the center speaker (C), the left and right

surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be

enjoyed.

To achieve the best possible surround sound, install your speakers as shown below.

Hints on the speaker placement

Where you put your speakers in the room has a big effect on the quality of the sound. The

following guidelines should help you to get the best sound from your system.

•

The subwoofer can be placed on the floor. Ideally, the other speakers should be at about

ear-level when you’re listening to them. Putting the speakers on the floor (except the

subwoofer), or mounting them very high on a wall is not recommended.

•

For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from

the TV.

•

If you’re going to place speakers around your CRT TV, use shielded speakers or place the

speakers at a sufficient distance from your CRT TV.

•

If you’re using a center speaker, place the front speakers at a wider angle. If not, place

them at a narrower angle.

•

Place the center speaker above or below the TV so that the sound of the center channel is

localized at the TV screen. Also, make sure the center speaker does not cross the line

formed by the leading edge of the front left and right speakers.

•

It is best to angle the speakers towards the listening position. The angle depends on the

size of the room. Use less of an angle for bigger rooms.

•

The optimal positioning for surround speakers is just above ear height. Make sure the

speakers don’t face each other. For DVD-Audio, the speakers should be more directly

behind the listener than for home theater playback.

•

Try not to place the surround speakers farther away from the listening position than the

front and center speakers. Doing so can weaken the surround sound effect.

CAUTION

•

Make sure that all speakers are securely installed. This not only improves sound quality,

but also reduces the risk of damage or injury resulting from speakers being knocked over

or falling in the event of external shocks such as earthquakes.

120

5.1 channel surround system:

Connecting your equipment

Placing the speakers

By connecting the left and right front speakers (L/R), the center speaker (C), the left and right

surround speakers (SL/SR), and the subwoofer (SW), a 5.1 ch surround system can be

enjoyed.

To achieve the best possible surround sound, install your speakers as shown below.

Hints on the speaker placement

Where you put your speakers in the room has a big effect on the quality of the sound. The

following guidelines should help you to get the best sound from your system.

•

The subwoofer can be placed on the floor. Ideally, the other speakers should be at about

ear-level when you’re listening to them. Putting the speakers on the floor (except the

subwoofer), or mounting them very high on a wall is not recommended.

•

For the best stereo effect, place the front speakers 2 m to 3 m apart, at equal distance from

the TV.

•

If you’re going to place speakers around your CRT TV, use shielded speakers or place the

speakers at a sufficient distance from your CRT TV.

•

If you’re using a center speaker, place the front speakers at a wider angle. If not, place

them at a narrower angle.

•

Place the center speaker above or below the TV so that the sound of the center channel is

localized at the TV screen. Also, make sure the center speaker does not cross the line

formed by the leading edge of the front left and right speakers.

•

It is best to angle the speakers towards the listening position. The angle depends on the

size of the room. Use less of an angle for bigger rooms.

•

The optimal positioning for surround speakers is just above ear height. Make sure the

speakers don’t face each other. For DVD-Audio, the speakers should be more directly

behind the listener than for home theater playback.

•

Try not to place the surround speakers farther away from the listening position than the

front and center speakers. Doing so can weaken the surround sound effect.

CAUTION

•

Make sure that all speakers are securely installed. This not only improves sound quality,

but also reduces the risk of damage or injury resulting from speakers being knocked over

or falling in the event of external shocks such as earthquakes.

120

5.1 channel surround system:

Perussoitto

Basic playback

Music playback using BLUETOOTH

wireless technology

You can wirelessly enjoy music files stored in a smartphone

or other BLUETOOTH capable device. The coverage area is

about 10 meters.

Note

•

The BLUETOOTH

word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc.

•

The BLUETOOTH wireless technology enabled device

must support A2DP profiles.

•

We do not guarantee proper connection and operation of

this unit with all BLUETOOTH wireless technology

enabled devices.

Pairing with the unit (Initial registration)

Pairing should be performed when first using the unit with the

BLUETOOTH capable device, or when the pairing data on

the device has been erased for any reason.

•

After pressing the

and switching to BT Audio function,

perform the pairing procedure on the BLUETOOTH

capable device. If pairing has been performed correctly,

you will not need to perform the pairing procedures for the

unit as shown below.

Press the

Turn on the power to the BLUETOOTH capable device

that you wish to pair with, and perform pairing

procedure on it.

•

This unit will be displayed as “Pioneer VSX-531D” on

all BLUETOOTH capable devices that you have.

Pairing will start.

•

Place the BLUETOOTH capable device close to the

unit.

•

Please refer to the user’s manual for your

BLUETOOTH capable device for details on when

pairing can be performed and the procedures

required for pairing.

•

When PIN code entry is requested, enter “0000”. (This

unit does not accept any PIN code setting other than

“0000”.)

Confirm on the BLUETOOTH capable device that

pairing has been completed.

If pairing with the BLUETOOTH capable device has

been completed correctly “CONNECT” will be displayed.

Listen to music on the unit from a BLUETOOTH

capable device

Press the

The unit will switch to BT Audio input.

A BLUETOOTH connection will be created between the

BLUETOOTH capable device and the unit.

Procedures for connecting to the unit should be

performed from the BLUETOOTH capable device.

•

Please refer to the user’s manual for your

BLUETOOTH capable device for details of the

connection procedures.

Playback music from the BLUETOOTH capable device.

Radio wave caution

This unit uses a 2.4 GHz radio wave frequency, which is a

band used by other wireless systems (see list below). To

prevent noise or interrupted communication, do not use this

unit nearby such devices, or make sure these devices are

switched off during use.

•

Cordless phones

•

Cordless facsimiles

•

Microwave ovens

•

Wireless LAN devices (IEEE802.11b/g)

•

Wireless AV equipment

•

Wireless controllers for game systems

•

Microwave-based health aids

•

Some baby monitors

Other, less common, equipment that may operate on the

same frequency:

•

Anti-theft systems

•

Amateur radio stations (HAM)

•

Warehouse logistic management systems

•

Discrimination systems for train or emergency vehicles

Note

•

In the event noise appears in your television image, there

is the possibility that a BLUETOOTH wireless technology

enabled device or this unit (including products supported

by this unit) are causing signal interference with the

antenna input connector of your television, video, satellite

tuner, etc. In this event, increase the distance between the

antenna input connector and the BLUETOOTH wireless

technology enabled device or this unit (including products

supported by this unit).

•

If there is something obstructing the path between this unit

(including devices supported by this unit) and the device

equipped with BLUETOOTH wireless technology (such as

a metal door, concrete wall, or insulation containing tinfoil),

you may need to change the location of your system to

prevent signal noise and interruptions.

Scope of operation

Use of this unit is limited to home use. (Transmission

distances may be reduced depending on communication

environment.)

PHASE

S.RETRIEVER

BT AUDIOBT AUDIO

TRE

BASS

CBLBD

S.BOX

GAME

USBTUN

AUX

Musiikin soitto käyttäen langatonta

BLUETOOTH-teknologiaa

Voi kuunnella langattomasti älypuhelimelle tai muulle

BLUETOOTH-laitteelle tallennettuja musiikkitiedostoja.

Kantama on noin 10 metriä.

Huomio

• BLUETOOTH-sanamerkki ja logot ovat Bluetooth SIG

Inc.’in rekisteröityjä tuotemerkkejä.

• Langattoman BLUETOOTH-laitteen on tuettava A2DP-

proileja.

• Emme takaa kaikkien langattomien BLUETOOTH-

laitteiden kytkeytyvän ja toimivan täysin tämän

vastaanottimen kanssa.

Laitepari (Alkurekisteröinti)

Laitepari tulee muodostaa käytettäessä BLUETOOTH-

laitetta vastaanottimen kansa ensi kertaa, tai jos aiemmat

paritiedot on jostain syystä poistettu.

• Paina

ja siirry BT Audio -toimintoon. Muodosta

laitepari BLUETOOTH-laittteen kanssa. Jos pari on

muodostettu oikein, alla kuvattua toimenpidettä ei enää

tarvita.

1 Paina

2 Kytke virta siihen BLUETOOTH-laitteeseen, jonka

kanssa haluat muodostaa parin ja muodosta pari

kyseisen laitteen asetuksilla.

• Bluetooth-laitteessa vastaanottimen nimenä on

”Pioneer VSX-531D”.

Pari muodostetaan.

• Asete BLUETOOTH-laite lähelle vastaanotinta.

• Katso BLUETOOTH-laitteen ohjeista parin

muodostamisen yksityiskohdat ja tarpeelliset

toimenpiteet.

• Jos tarvitaan PIN-koodin syöttö, syötä ”0000”.

(Tälle laitteelle ei voi antaa muuta PIN-koodia kuin

”0000”).

3 Varmista BLUETOOTH-laitteelta, että pari on

muodostettu.

Jos parin muodostaminen on onnistunut täysin,

näytössä on ”CONNECT”.

Kuuntele musiikkia BLUETOOTH-laitteelta

1 Paina BT.

Vastaanottimen tuloliitännäksi valitaan BT Audio.

2 BLUETOOTH-yhteys luodaan BLUETOOTH-

laitteen ja vastaanottimen välille.

Kytkeytyminen vastaanottimeen tehdään

BLUETOOTH-laitteelta käsin.

• Katso yksityiskohdat kytkeytymisestä BLUETOOTH-

laitteen ohjeista.

3 Soita musiikkia BLUETOOTH-laitteelta

Tärkeää radioaalloista

Tämä laite käyttää radioaaltotaajuutta 2,4 GHz ja samaa

kaistaa käyttävät monet muutkin langattomat järjestelmät

(katso lista alla). Estä kohinaa ja katkoksia yhteydessä,

äläkä käytä vastaanotinta näiden läheisyydessä tai

sammuta nämä laitteet:

• Langattomat puhelimet

• Langattomat faksit

• Mikroaaltouunit

• Langattomat verkkolaitteet (IEEE802.11b/g)

• Langattomat AV-laitteet

• Pelikonsoleiden langattomat ohjaimet

• Mikroaaltoja käyttävät terveystuotteet

• Jotkut itkuhälyttimet

Samalla taajuudella saattavat toimia harvinaisemmat

laitteet:

• Varkaudenestojärjestelmät

• Amatööriradioasemat (HAM)

• Varastojen logistiikkajärjestelmät

• Junien tai hälytysajoneuvojen varoitusjärjestelmät

Huomio

• Mikäli television kuvassa näkyy häiriötä, mahdollisesti

langaton BLUETOOTH-laite tai tämä vastaanotin (tai

jokin siihen kytketty laite) aiheuttaa häiriösignaalin TV:n,

videon tai satelliittivirittimen antennin tuloliitännälle.

Tällaisessa tapauksessa vie BLUETOOTH-laite

kauemmas antenniliittimestä tai vastaanottimesta (sekä

kytketyistä laitteista).

• Jos vastaanottimen ja BLUETOOTH-laitteen välisen

suoran yhteyden sisällä on este (kuten metalliovi,

betoniseinä tai folioeriste), sinun on ehkä siirrettävä

järjestelmä toiseen paikkaan kohinan ja katkoksien

estämiseksi.

Käyttötarkoitus

Tämä laite on tarkoitettu kotikäyttöön. Ympäristöstä

riippuen viestinnän toimiva yhteys voi olla lyhyempi.