User manual

2323
> Specifications > Settings > Listening Modes > Playback Function > Basic Manual
Troubleshooting | Appendix
Setting Item Default Value Setting Details
Height Left 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
/
, adjust
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" with
/ .
•
If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Height Right 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
/
, adjust
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" with
/ .
•
If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Surround Right 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
/
, adjust
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" with
/ .
•
If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Surr Back Right 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
/
, adjust
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" with
/ .
•
If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Setting Item Default Value Setting Details
Surr Back Left 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
/
, adjust
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" with
/ .
•
If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Surround Left 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
/
, adjust
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" with
/ .
•
If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Subwoofer 0 dB After selecting the speaker frequency from between
"31 Hz" and "250 Hz" with the cursors
/
, adjust
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" with
/ .
•
This cannot be selected if "No" is set in
"System Setup" - "Speaker" - "Configuration" -
"Subwoofer".
•
The result may not be as expected depending on the input source and listening mode setting.
•
If you want to make the adjustments while listening to something, press
on the remote controller,
and select the Preset you want to adjust in AV Adjust - MCACC - Manual EQ Select first.