VIDEO SWITCHER VSW-1 Operating Instructions
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method of connecting and operating the unit is the same.
Features/Specifications Features 1. Quick response Using the latest circuit technology, this unit suppresses noises and color distortion even during sudden switchovers. 2. Automatic switching Can be combined with a Pioneer DJ mixer for video switching linked to the fader start mode. 3. Full complement of input/output connectors Supports component video, S-Video, and composite video IN/OUT signals. (Signals are only input and output; no conversion function is provided.
Connections Connections Connection Panel 1 2 PLAYER B COMPOSITE S 3 MIXER PL CONT PL B CONT 4 PLAYER A COMPOSITE S 5 MIXER PL CONT PL A CONT 6 VIDEO OUT CHROMA SYNC COMPOSITE COMPOSITE S COMPONENT S Y COMPONENT CB / PB CR / PR SYNC Y COMPONENT CB / PB 1. PLAYER B connectors Use to connect this unit to player B (DVJ-X1). COMPOSITE Composite video input connector (RCA pin jack x 1). Use video cable (provided with DVJ-X1) to connect to player B’s VIDEO OUT connector.
Connections Basic Connections This unit is designed to allow switching between component video, S-Video, and composite video signals, but does not support signal conversion. As a result, the same signals required for output must be input. Further, while three different types of signals can be connected simultaneously for switching between them, only one of the types must be selected for chroma signal synchronization.
Operation Operation This unit is a 2-channel video selector designed to allow switching between the video output signals from two DVJ-X1 DJ DVD players. This component is designed to allow use of a fader start signal output from a DJ mixer to perform automatic signal switching; it also generates sync signals to help suppress image distortion when switching between video signals. Operation Panel 1 2 3 4 PAL POWER OFF VIDEO FADER START ON A 5 6 1.
Troubleshooting Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think there is something wrong with this component, check the points below. Sometimes the trouble may originate from another component. Thus, also check the other electrical appliances also in use. If the trouble cannot be rectified even after checking the following items, contact your dealer or nearest PIONEER service center. Symptom Cause Remedy Power doesn’t turn on.
We Want You Listening For A Lifetime Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
