User Manual
Table Of Contents
-  Precaution
-  Disclaimer
-  How to read this Manual
-  Usage Precautions
-  Check the Accessories
-  Before Installing the Product
-  Installation
-  Connecting the Power Cable
-  Part Names
-  Inserting and Ejecting the microSD Card
-  Backing Up Recorded Files
-  Using this product
-  This Product’s Settings
-  Guide to Recording Time and No. of Photos
-  Dedicated App
-  Trademarks & Copyrights
-  GPS
-  Troubleshooting
-  Specifications
− 35 −
English
Dedicated App
The dedicated app “Dash Camera Interface” can be used to check the video recorded on this
product or make settings on the screen of an iPhone or Android device.
To use this app, a Wi-Fi connection must be made between this product and iPhone or Android
device beforehand.
1 Set the Wi-Fi function of this product to on. →
“This Product’s Settings”
2 Operate the device to select this product as the Wi-Fi connection device.
The SSID name (access point name) and password of this product can be checked in the Wi-Fi
settings screen.
•Only one device can be connected to this product at any one time. When a second device is connected,
the first device is disconnected.
•While a Wi-Fi connection is made, no operations can be performed on this product. If a function button
is pressed while a Wi-Fi connection is made, a message will be displayed prompting you to break the
Wi-Fi connection. If you select [Yes], the Wi-Fi connection will be disconnected, and operations on this
product will be enabled.
•You can change the SSID name of this product by operating the dedicated app “Dash Camera
Interface”. Note, however, when the SD card is formatted, the SSID name returns to its default setting.
•It is recommended to enter the search term “Dash Camera Interface” in the search field to search for
the application.
Dash Camera Interface