User Manual
Table Of Contents
-  Precaution
-  Disclaimer
-  How to read this Manual
-  Usage Precautions
-  Check the Accessories
-  Before Installing the Product
-  Installation
-  Connecting the Power Cable
-  Part Names
-  Inserting and Ejecting the microSD Card
-  Backing Up Recorded Files
-  Using this product
-  This Product’s Settings
-  Guide to Recording Time and No. of Photos
-  Dedicated App
-  Trademarks & Copyrights
-  GPS
-  Troubleshooting
-  Specifications
− 19 −
English
Connecting the Power Cable
•Be sure to disconnect the ⊖ terminal of the vehicle’s battery before connecting the power cable.
•The product should be installed by authorized service company personnel who have special training
and experience with mobile electronics products.
The parking mode (security mode allowing 24-hour, 365-day surveillance) can be used by extracting
power directly from the vehicle by the power cable.
You can also connect the product to a head unit by using an AV cable and audio output mini pin jack-
RCA conversion cable so that you can check video footage and/or the camera view using the head unit
screen.*
*Do not connect the product via AV cable unless the head unit displays video input only while the
vehicle is parked.
Black 0.5 m/1 ft. 8 in.
Yellow 0.5 m/1 ft. 8 in.
Red 0.5 m/1 ft. 8 in.
4.5 m/
14 ft. 9 in.
Fuse
(F 2 AL/250 V)
Fuse
(F 2 AL/250 V)
0.2 m/
7-7/8 in.
Wiring specification of
this product
Audio is recorded in
monaural sound.
Audio (L)
Audio (R)
Ground
Video
Yellow Video
White Audio (L)
Red Audio (R)
Black 5 m/16 ft. 5 in.