User Manual
Table Of Contents
-  Precaution
-  Disclaimer
-  How to read this Manual
-  Usage Precautions
-  Check the Accessories
-  Before Installing the Product
-  Installation
-  Connecting the Power Cable
-  Part Names
-  Inserting and Ejecting the microSD Card
-  Backing Up Recorded Files
-  Using this product
-  This Product’s Settings
-  Guide to Recording Time and No. of Photos
-  Dedicated App
-  Trademarks & Copyrights
-  GPS
-  Troubleshooting
-  Specifications
− 18 −
English
5 Route the power cable, 2nd camera connection cable and AV cable to the
passenger seat side.
シガーライター
電源ケーブル
アクセサリー
ソケット
Main Unit
2nd camera
Connection cable
6 Connect the power cable and AV cable.
→
“Connecting the Power Cable”
7 Turn the vehicle engine on to display the recording screen.
8 Adjust the angle of the lens so that video outside and inside the vehicle is
properly displayed.
Turn the angle adjustment
jog dial to adjust the lens
angle.
Turn this part to adjust the
lens angle.
Before driving, turn the lens of this product towards the outside of the vehicle.
This product restarts when the lens angle is moved from the outside of the vehicle to the inside, and
vice versa.
To switch between camera video from this product and video from the 2nd camera, press the
button. →
“Function Buttons”
Note
A protective film is applied to the lens when the product is purchased. Peel off this film.