User Manual
Table Of Contents
-  Precaution
-  Disclaimer
-  How to read this Manual
-  Usage Precautions
-  Check the Accessories
-  Before Installing the Product
-  Installation
-  Connecting the Power Cable
-  Part Names
-  Inserting and Ejecting the microSD Card
-  Backing Up Recorded Files
-  Using this product
-  This Product’s Settings
-  Guide to Recording Time and No. of Photos
-  Dedicated App
-  Trademarks & Copyrights
-  GPS
-  Troubleshooting
-  Specifications
− 16 −
English
IMPORTANT
Always install this product in the specified installation position to ensure a safe field of view while
driving and to achieve full performance from the product.
Recommended Installation Position on Rear Windshield
When installing the 2nd camera on the inside of the rear window, installation in a vehicle and in a
position that satisfies all of the following conditions is recommended.
•A position where the lens part of the 2nd camera is within the wiping range of the wiper.
•A position where the 2nd camera faces in the horizontal direction to the rear and side to side.
•A position where the lens part of the 2nd camera and the double-sided tape do not overlap the heating
wires.
•A position where the 2nd camera connection cable can be routed without unnecessary force.
2nd camera
Rear windshield
Connection cable
Heating wires
Wiping range of the rear wiper
1 Clean the installation area of dirt and oils using the included cleaning cloth.
Front windshield Rear windshield
2 Install this product.
①: Set the mounting bracket on this product.
②: Peel off the double-sided tape release paper from the mounting bracket.
③: Install at the specified position of the front windshield.
2
1
3
Front
Windshield
Firmly push
this product.
CAUTION
•Make sure that the surface of the front windshield is dry before applying the tape.