User Manual

− 21 −
English
Install the Rear Camera
The top and bottom of the image can be set according to the mounting direction of the rear camera.
“This Product’s Settings” - “Configurable Features” - “Recording Setting” - “Install Position”
1 Clean the installation area of dirt and oils using the included cleaning cloth.
2 Install the rear camera.
1 : Peel off the double-sided tape release paper from the rear camera.
2 : Adjust the lens so that it faces outside the vehicle, and install at the specified position on the rear
windshield.
1
②
Firmly push this product.
Turn this part to adjust.
CAUTION
•Make sure that the surface of the rear windshield is clean and dry before attaching the rear camera.
•Use extreme care as the double-sided tape on the rear camera is extremely strong, and should not be
reapplied once it has been applied.
•To ensure the installation strength of the adhesive tape, leave this product for 24 hours after application
before using it.
Note
•A protective film is applied to the lens when the product is purchased. Peel off this film.