User's Manual

Getting started04
40
En
Memorizing stations
You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time.
1 Tune to an AM or FM radio station.
For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.
2 Press SYSTEM SETUP (SHIFT + HOME
MENU).
3 Use the / (cursor left/right) buttons
to choose ‘St. Memory?’ then press ENTER.
4 Use the / (cursor up/down) buttons
to select the station preset you want.
There are 30 preset locations; each can store
one station preset.
5 Press ENTER to save the station preset.
• If the system is unplugged from the power
supply completely, saved stations will
remain for several days, after which you’ll
have to save them again.
Listening to station presets
1 Make sure the TUNER function is
selected.
2 Use ST +/– or the number buttons to
select a station preset.
• If you are using the front panel controls,
press TUNER FM/AM/ST. until you’re in
station preset mode, then use the 
and  buttons to select a station
preset.
Listening to other sources
You can connect up to three external sources
(TV, satellite receiver, etc.) to this system,
including one digital source. See also Listening
to TV audio through this system on page 18 and
Connecting auxiliary components on page 81.
1 If the system isn’t already on, press 
STANDBY/ON to switch on.
Also make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2 Select the source you want to listen to.
• If you’re using the remote control, press TV
to select the TV input, or use the LINE (L1/
L2) button to select the LINE 1 or LINE 2
input.
• The TV/L1/L2 button on the front panel
switches between the three inputs.
3 If necessary, start playback of the
external source.
STANDBY/ON
L1/L2
TV
LINE