Manual

REMOTE CONTROL UNIT FACILITIES I-SX-303R/SX-253R'I
REMOTE CONTROL RANGE
When operating the remote control unit, point the front of the
unit at the front panel of the receiver. The remote control unit
may be used within a range of about 7 meters (23 feet) from the
remote sensor, within angles of up to about 30 degrees.
Remote control will not be possible if there is an obstacle be-
tween the remote control unit itself and the remote sensor win-
dow in the receiver. Performance of the remote control unit is ad-
versely affected in the presence of strong fluorescent light. Keep
such lights away, specially from the sensor window.
LOADING BATTERIES
1. Open the rear cover.
2. Install size _AA" (IEC R6P) batteries correctly matching
polarity.
3. Close the cover.
\
7m (23 feet)
®
@
This remote control unit can be used to operate some functions
of Pioneer _ marked CD players and cassette deck.
'.1_)RECEIVER POWER button
SLEEP button
Activates the SLEEP timer. The length changes in the following
manner each time the button is pressed:
_ 90 _ 60 -_ 30 -_O(OFF) --
Unit: minutes
During SLEEP timer operation, SLEEP is displayed on the
receiver OPERATION DISPLAY.
@ TAPE 1/VCR button
@ TAPE 2 MONITOR button
LD button
CD button
Incorrect use of batteries may lead to leakage or rup-
ture. Always be sure to follow these guidelines:
A: Always insert batteries into the battery compartment
correctly matching the positive (+) and negative (-)
polarities, as indicated inside the compartment.
B: Never mix new and used batteries.
C: Batteries of the same size may have different voltages,
depending on their type. Do not mix different type of batte-
ries.
(7_ DECK operation button
TAPE POWER: Turns deck power ON/OFF.
DECK h DECK I selection.
DECK Ih DECK II selection.
•: Stop
<1 I_ : Reverse and Forward playback
(Set the function button to TAPE position.)
_1_1: Rewind in forward mode, fast forward in reverse
mode.
I_1_: Fast Forward in forward mode, rewind in reverse
mode.
NOTE:
• To operate the cassette deck, first press the Deck / or Deck II but-
ton to select the desired deck. Then press the correct control but-
tons.
• To operate the single deck, first the Deck I1 button. Then press the
correct control buttons.
• Refer to your cassette deck's operating instructions for details.
CD operation button
CD POWER: Turns CD player power ON/OFF.
DISC SELECT -/+: DISC selection.
• : Stop
I_: Play.
_1_1, I_l_l: Track search.
NO TE:
• Note that the DISC SELECT button on the accessory remote con-
trol unit may not function, depending on the CD player used.
Refer to your CD player's operating instructions for details.
SCAN button
Scans memorized stations.
1_ STATION +/- button
• Before operation, memorize broadcast stations in the STA=
TION CALL buttons. (see page 1 1 )
+: Station change in order in the upward direction.
- : Station change in order in the downward direction.
1_ PHONO button
TUNER button
VOLUME +/- button
8
<ARB1470>