User manual

Names and functions of parts
9
It
De
Remote control
Í STANDBY/ON button: Press this button to turn the
unit on or put it in standby mode.
INPUT SELECTOR buttons: Use these buttons to
select the source to playback.
Skip (:/9) buttons (*)
Search (6/5) buttons (*)
REPEAT button: Turns repeat play on and off and
selects the mode. (*)
SPEAKERS A/B button: Select the terminals to
output audio from between SPEAKERS A/B.
Direction ( / / / )/ENTER buttons: Select items
with the direction buttons and press the ENTER button
to confirm.
SETUP button: Used to display the setup menu.
CH (i/j) buttons: Select registered stations.
Number buttons
DISPLAY button:
Change the information shown.
DIMMER button: Use this button to switch the
display’s brightness between normal, moderately dark
and dark.
Pause (;) button (*)
Playback (1) button (*)
Stop (∫) button (*)
RANDOM button: Plays tracks in the folder or playlist
(DLNA) randomly. (*)
MENU button: Press this button to display the menu.
RETURN button: Returns the display to the previous
state during setting or operation.
VOLUME (i/j) button
AUDIO button:
Use this button to adjust sound quality,
etc.
MUTE button: Temporarily mutes audio.
CLR button: Use this button to clear the characters
that you have input.
SLEEP button: Press this button to set the sleep
timer.
*
Operate with USB storage device play or the home network
feature (DLNA, Home Media).
* If you do not use the remote control for a long time, remove the
batteries to prevent leakage. Note that keeping consumed
batteries inside may cause corrosion resulting in damage of the
remote control.
Remote control sensor
5m or less
Batteries
(AAA/R03)
SX-N30_mst.book 9 ページ ２０１５年１１月２日 月曜日 午後１２時５５分