User manual

7
It
De
Names and functions of parts
Front
Í STANDBY/ON button: Press this button to turn the
unit on or put it in standby mode.
NETWORK STANDBY LED: Lights when any of
Network Standby, Bluetooth Wakeup, or Opt1 In
Wakeup are on.
INPUT SELECTOR control: Selects the source to
playback.Turn the control to switch the source in the
following order; BD/DVD
# SAT/CBL # AUX #
GAME # SACD/CD # PHONO # TV # AM (SX-
N30), DAB (SX-N30DAB)
# FM # NET #
BLUETOOTH
MEMORY button: Press this button to register a AM/
DAB/FM station.
TUNING MODE button: Press this button to switch
the tuning mode for AM/FM broadcasts.
Press also to select the DAB station display order.
DISPLAY button: Change the information shown.
SLEEP button: Press this button to set the sleep
timer.
Display (> 8)
SETUP button:
Used to display the setup menu.
ENTER button: Press this button to confirm the
selection.
RETURN button: Returns the display to the previous
state during setting or operation.
Direction/ TUNING / PRESET buttons: Used
to move the cursor. When listening to AM/DAB/FM
broadcasting, tune in to the station with TUNING
or select the registered station with PRESET .
VOLUME control: Used to adjust the volume.
Remote control signal receiver
PHONES terminal:
Connect headphones with a
standard plug.
DIRECT button: Selects the listening mode. The
mode changes Direct
# Pure Direct # Stereo each
time you press the button.
*
Direct: Outputs pure sound as it was intended by bypassing the
tone control circuits during play. The “DIRECT” indicator on the
display lights when selected. “Bass” and “Treble” are disabled.
Pure Direct: Tone control circuits are bypassed during play, and
the display, which also causes noise, is turned off, enabling an
even purer sound. The LED lights when selected. “Bass” and
“Treble” are disabled.
BASS control: Adjusts the bass level.
TREBLE control: Adjusts the treble level.
BALANCE control: Adjusts the audio output balance
between the left and right speakers.
RT/PTY/TP button (SX-N30) , PS/RT/PTY button
(SX-N30DAB) : Use when receiving stations
transmitting text information.
SPEAKERS A/B button: Select the terminals to
output audio from between SPEAKERS A/B.
USB port: A USB storage device is connected so that
music files stored in it can be played.
(SX-N30DAB)
SX-N30_mst.book 7 ページ ２０１５年１１月２日 月曜日 午後１２時５５分