User manual

Connections
16
∫ If you selected “Use iOS Device”
7. On the iOS device, go to “Settings”-“Wi-Fi” and turn on
the setting, then select this unit in “SETUP NEW
AIRPLAY SPEAKER”.
8. Tap “Next”.
When connection is successful: The setup menu ends
automatically.
0 You can confirm the connection status by pressing the
SETUP button and selecting “5. Network”-“Status”.
When the access point is not displayed
Use the direction ( ) button to select the “Other...” on
the display and press the ENTER button. Input the
SSID. When “Security” is displayed on the display,
make the following settings according to the router
setting.
0 For information on how to input characters, see
“Inputting characters” (> 33) under “Various
settings”.
∫ WPA/WPA2 method
Use the direction ( / ) buttons to select the “WPA”
or “WPA2” on the display and press the ENTER
button. Input the password.
∫ WEP method
Use the direction ( / ) buttons to select the “WEP”
on the display and press the ENTER button. Input the
password. When “Default Key” is displayed on the
display, select the Default Key ID and press the
ENTER button.
0 If encryption setting has not been made on the
wireless LAN router, use the direction ( / )
buttons to select the “None” on the “Security”
display and press the ENTER button.
SX-N30_mst.book 16 ページ ２０１５年１１月２日 月曜日 午後１２時５５分