SMARTPHONE RECEIVER English SPH-10BT Operation Manual
Table of Contents Getting Started ........................................................................................ 3 Radio ....................................................................................................... 12 Bluetooth ............................................................................................... 14 Using Pioneer Smart Sync/APP.......................................................... 17 Parking Sensor ............................................................
Getting Started Basic operation English SPH-10BT USB port Smartphone holder Display window Application launch Source (music)/Off Navigation Voice recognition Detach button Phone Message Frequently used operations Purpose Operation Turn on the power* Press to turn on the power. Press and hold to turn off the power. Adjust the volume Press / Select a source Press repeatedly. Return to the previous display/list Press . . Return to the normal display from the menu Press and hold .
Detaching the front panel Detach the front panel to prevent theft. Remove any cables and devices attached to the front panel and turn off the unit before detaching it. Detach Attach English Important • Avoid subjecting the front panel to excessive shock. • Keep the front panel out of direct sunlight and high temperatures. • Always store the detached front panel in a protective case or bag.
Operating the smartphone holder WARNING Removing the smartphone holder 1 Detach the front panel (page 4). 2 Pull out the holder by holding the anti slip portion on the edge of the holder until the holder is completely visible. CAUTION Never pull up the holder until the holder is completely visible. 3 Pull up the holder vertically. -5- English • Detach the smartphone from the holder while driving under bad road conditions since the smartphone may fall from the holder.
English CAUTION Make sure that the line can be seen when the holder is pulled up vertically. 4 Attach the front panel to the unit (page 4). Adjusting the smartphone holder horizontally 1 Slide the holder while the holder is in a horizontal position.
English NOTE Detach the smartphone from the device while adjusting the holder. 2 Pull up the holder. Attaching the smartphone to the holder CAUTION • Depending on the shape of the smartphone, smartphone case or cover, it may not be attachable to the holder. • Be careful not to pinch your fingers in the holder. Compatible smartphone size H: 58 mm - 170 mm W: 58 mm - 87 mm D: 4 mm - 10 mm Weight: under 0.25 kg 1 Hook the smartphone on the upper arm and then push it into the lower arm.
English 2 Slide the lower arms position to avoid hitting the lower arm and smartphone buttons against each other. NOTES • Make sure that the smartphone is held properly on the holder. • When the smartphone buttons come in contact with the upper or lower arms, adjust the smartphone’s position or turn the smartphone upside down.
Adjusting the smartphone holder Adjusting the holder angle English The holder angle range: Downward 45° to upward 100° WARNING Do not set the holder where it may (i) interfere with vehicle panels or switches or (ii) impair the driver’s performance. Turning the smartphone holder from a horizontal to a vertical position 1 Rotate the smartphone holder 90° clockwise. CAUTION Be careful to not drop the smartphone when the smartphone is attached to the holder while rotating.
CAUTION Be careful to not drop the smartphone when the smartphone is attached to the holder while rotating. Detaching the smartphone from the holder 1 Pull out the smartphone while pushing up the upper arm with the smartphone. English CAUTION • Be careful to not drop the smartphone. • Do not use the holder when the smartphone is detached. Storing the smartphone holder 1 Detach the front panel (page 4). 2 Fold the holder horizontally. 3 Push the holder completely into the unit.
English 4 Attach the front panel to the unit (page 4). INITIAL settings 1 2 3 4 Press and hold until the unit turns off. Press and hold to display the main menu. Press to select [INITIAL], then press Press to select an option, then press to confirm. to confirm. Menu Item Description FM STEP Select the FM tuning step from 100 kHz or 50 kHz.
Menu Item Description RESET Select [YES] to initialize the unit settings. The unit will be restarted automatically. [YES], [NO] English Radio The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS (radio data system) function only works in areas that broadcast RDS signals for FM stations. Receiving preset stations 1 2 3 Press to select [RADIO].
To store stations manually This function is only available on Pioneer Smart Sync (page 17). For details, see the application's help section. Using PTY functions 1 2 3 4 5 Press and hold during FM reception. Press to select [FUNCTION], then press Press to select [PTY], then press to confirm. to confirm. Press to select a program type from [NEWS/INF], [POPULAR], [CLASSICS] or [OTHERS]. Press . The unit begins to search for a station. When it is found, its program service name is displayed.
CAUTION Use a USB cable (sold separately) to connect the USB device as any device connected directly to the unit will protrude out from the unit, which could be dangerous. Before removing the device, stop playback. NOTE If you use an AOA connection, [APP CTL] needs to be set to [WIRED] in the SYSTEM settings (page 24). Operations You can make various adjustments in Pioneer Smart Sync (page 17). Purpose Operation Select a folder*1 Press .
3 Make sure the same 6-digit number appears on this unit and the device, then select [Y] if the 6-digit numbers displayed on this unit and the device are the same. Bluetooth reconnection 1 2 3 4 Turn on the Bluetooth function of the device. Press . [DEV LIST] appears. Press to select the device. Press to confirm. Bluetooth telephone First, make a Bluetooth connection with the Bluetooth telephone (page 14). Up to two Bluetooth telephones can be connected simultaneously.
Purpose Operation Reject an incoming call Press and hold Adjust the volume of the caller’s voice (When private mode is on, this function is not available.) Press or when a call is received. during the call. This function is only available when an iPhone/Android device equipped with voice recognition is connected to the unit via Bluetooth. 1 Press then talk into the microphone to input voice commands. To exit the voice recognition mode, press and hold .
Basic operations You can make various adjustments in Pioneer Smart Sync (page 17). Purpose Operation Press and hold Select a track Press or or . . Using Pioneer Smart Sync/APP Pioneer Smart Sync is the application that intelligently brings your maps, messages, and music together in the vehicle. You can operate the unit from Pioneer Smart Sync installed on an iPhone/Android device. In some cases, you can control aspects of the application, such as source selection, pause, etc., by using the unit.
Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to their own software design, regardless of the OS version. What kind of function does the application have? Promoting the use of the unit The interface of the unit can be evolved by using your iPhone/Android device.
Description 31 Band EQ setting You can select an equalizer band from the 31-band graphic equalizer. Super "Todoroki" Sound You can boost the bass level more dynamically than when not using the Pioneer Smart Sync connection. Easy Sound Fit You can perform the time alignment setting easily by selecting your vehicle type. Theme setting You can set the wall paper and the theme colour at once. NOTES • Some functions may be restricted depending on the connection conditions with the application.
NOTES • If Pioneer Smart Sync has not been installed on your iPhone/Android device yet, a message that prompts you to install the application will appear on your iPhone/Android device. • When you connect a mobile device other than an iPhone/Android device, it may not operate correctly depending on your mobile device. • To connect to the Pioneer Smart Sync manually, press and hold . 1 Press to select [APP]. Parking Sensor A separately sold parking sensor (e.g.
NOTE The setting operation from this unit is not available when Pioneer Smart Sync is connected. 1 2 to display the main menu. Press to select one of the categories below, then press • FUNCTION settings (page 21) • AUDIO settings (page 22) • SYSTEM settings (page 23) • ILLUMINATION settings (page 25) • P.SENSOR settings (page 26) Press to select the options, then press to confirm. to confirm. FUNCTION settings The menu items vary according to the source.
Menu Item Description AF [Y], [N] Allow the unit to retune to a different frequency providing the same station. (Available only when FM band is selected.) [Y], [N] Interrupt the currently selected source with news programs. (Available only when FM band is selected.) SEEK [MANUAL], [P.CH] Assign or buttons to seek the stations one by one (manual tuning) or select a station from the preset channels.
Menu Item Description SUB.W*2 [Y], [N] Set to [Y] when using a subwoofer speaker. D.BASS [OFF], [LOW], [HIGH] LOUDNES [OFF], [LOW], [MID], [HIGH] Compensate for clear sound at low volume. [+4] to [–4] Adjust the volume level for each source except FM. Each of the below combinations are set to the same setting automatically. • When making a USB connection, set USB, iPhone and APP. • When making a Bluetooth connection, set BT AUDIO, iPhone and APP. SLA S.
Menu Item Description BEEP [Y], [N] A beep can be heard when any button is pushed. Select [N] to disable this function. AUTO PI Search for a different station with the same programming, even if using a preset station. PW SAVE* [Y], [N] Reduce the battery power consumption. Turning on the source is the only operation allowed when this function is on. BT CLR [YES], [NO] Clear the Bluetooth device data (device list, PIN code, call history, phone book, preset phone numbers) stored in the unit.
continue to draw power from the battery if your vehicle’s ignition does not have an ACC (accessory) position.
P.SENSOR settings This setting functions by connecting the parking sensor (sold separately). Menu Item Description SENSOR Select the parking sensor function on or off. Adjust the parking sensor warning volume. OUTPUT [L+R], [LEFT], [RIGHT] Select the output of parking sensor warning sound. REVGEAR [BATTERY], [GROUND] Select the polarity of the connected reverse gear's lead.
Additional Information The display automatically returns to the normal display. → No operations have been made for about 30 seconds. – Perform an operation. NO XXXX (NO TITLE, for example) → There is no embedded text information. – Switch the display or play another track/file. The sound is intermittent. → You are using a device, such as a cellular phone, that may cause audible interference. – Move electrical devices that may be causing the interference away from the unit.
HUB ERR → The USB device connected via a USB hub is not supported by this unit. – Connect the USB device directly to this unit using a USB cable. ERROR-19 → Communication failed. – Perform one of the following operations, then return to the USB source. • Disconnect the USB device. • Change to a different source. → iPhone failure. – Disconnect the cable from the iPhone. Once the iPhone’s main menu is displayed, reconnect the iPhone and reset it. ERROR-23 → USB device was not formatted properly.
CAUTION • Pioneer cannot guarantee compatibility with all USB mass storage devices, and assumes no responsibility for any loss of data on media players, smartphones, or other devices while using this product. • Do not leave a USB storage device in any place that is subject to high temperatures. WMA files iPhone • Do not leave the iPhone in places with high temperatures. • Firmly secure the iPhone when driving.
Compatible format File extension Sampling frequency Stereo Bit Rate Apple Lossless AAC file bought from the iTunes Store (.m4p file extension) AAC encoded by iTunes .m4a 11.025 kHz to 48 kHz 16 kbps to 320 kbps, VBR Not compatible Not compatible FLAC files • FLAC files may not be playable, depending on the encoder. File extension Sampling frequency Quantization bit rate Channel mode .flac, .fla 8/11.025/12/16/22.05/ 24/32/44.
Example of a hierarchy Folder Compressed audio file Russian character chart D: Display C: Character Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of their respective owners. iTunes Apple and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.
iPhone and Lightning Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance. iPhone and Lightning are trademarks of Apple Inc.
Audio USB USB standard specification: USB 2.0 full speed Maximum current supply: 1.5 A USB Protocol: MSC (Mass Storage Class) AOA (Android Open Accessory) 2.0 File system: FAT12, FAT16, FAT32 MP3 decoding format: MPEG-1 & 2 Audio Layer 3 WMA decoding format: Ver. 7, 8, 9, 9.1, 9.2 (2 ch audio) AAC decoding format: MPEG-4 AAC (iTunes encoded only) (Ver. 10.6 and earlier) FLAC decoding format: v1.2.1 (Free Lossless Audio Codec) WAV signal format: Linear PCM (Noncompressed) FM tuner Frequency range: 87.
NOTE Specifications and the design are subject to modifications without notice.
© 2018 PIONEER CORPORATION. All rights reserved.
