Installation Manual

Connecting the system Connecting the system
Connecting the power cor
d (1)






10
Y
ellow
T
o terminal supplied with power regardless
of ignition switch position.
Notes
• When a subwoofer is connected to this
product instead of a rear speaker
,
change the rear output setting in the
initial setting. (Refer to the Operation
Manual.)
• The subwoofer output of this product is
monaural.
This product
F
use (10 A)
Power cord
Blue/white
To auto-antenna relay control terminal.
If the vehicle has a glass antenna, connect to the
antenna booster power control terminal (max. 300
mA 12 V DC).
R
ed
To electric terminal controlled by ignition
switch (12 V DC) ON/OFF.
Orange/white
To lighting switch terminal.
Black (ground)
To vehicle (metal) body.
With a two-speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Front speaker
White
White/black
Gray
Gray/black
Left
Rear speaker or
subwoofer (4 Ω)
Green
Green/black
Violet
Violet/black
When using a subwoofer of 70 W (2 Ω), be sure to connect with the violet and violet/black leads of this
product. Do not connect anything with the green and green/black leads.
Not used.
Green
Green/black
Violet
Violet/black