Operation Manual SPH-DA01 SPH-DA02 AppRadio Be sure to read Important Information for the User first! Important Information for the User includes the important information that you must understand before using this product.
Contents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference.
Contents – Using the equaliser 22 – Using balance adjustment 23 Customising the general settings 23 – Display settings 23 – General settings 24 – Time settings 24 – Subwoofer settings 24 – Selecting the language 25 – Source level adjustment settings 25 Assigning functions to the steering wheel 26 Changing the background image 26 Returning the AppRadio to the default or factory settings Restoring the default setting 27 Returning this product to the initial state 27 Appendix Troubleshooting 28 Positioning te
Chapter 01 Introduction Manual overview Before using this product, be sure to read Important Information for the User (a separate manual) which contains warnings, cautions, and other important information that you should note. ! Functions of other keys on the same screen are indicated with # at the beginning of the description: e.g.) # If you touch [OK], the entry is deleted. ! References are indicated like this: e.g.) = For details, refer to Answering a call automatically on page 19.
Chapter Introduction 01 Data subject to erasure Certain functions (such as viewing of appbased visual content and certain touch panel key operations) offered by this product could be dangerous and/or unlawful if used while driving. To prevent such functions from being used while the vehicle is in motion, there is an interlock system that senses when the handbrake is set.
Chapter 02 About AppRadio Features Listening to the radio You can listen to the radio by using this product. Checking part names and functions SPH-DA01 Playing iPod music You can play and operate the audio source with the iPhone connected. Advanced App Mode With Advanced App Mode, you can display the iPhone application screen on the display of AppRadio.
Chapter About AppRadio Disconnecting your iPhone % Pull out the iPhone cable after checking that no data is being accessed. Connecting and disconnecting an iPhone About AppRadio 5 microSD card slot p A microSD card is used only to upgrade the software of this product. p For details of software upgrades, refer to the information on our website. p Close the cover of the microSD card slot if you don’t use a microSD card.
Chapter 02 About AppRadio Startup and termination 1 Start the engine to boot up the system. After a short pause, the splash screen comes on for a few seconds. 2 Read the disclaimer carefully, checking its details, and then tap [OK] if you agree to the conditions. p On first-time startup, a language setup screen appears before the disclaimer. Select the language of your choice in this screen. 3 Turn off the vehicle engine to terminate the system.
Chapter Basic operation Home screen The Home screen is the main screen that allows access to your entertainment sources, Apps, settings and more. 03 Displays the settings menu screen. = For details, refer to Chapter 8. Reading the screen 1 2 Touch panel keys common to each function Basic operation Displays the rear view camera image. = For details, refer to Chapter 7. The touch panel keys for common operations for each function are described below. The previous screen returns.
Chapter 03 Basic operation Audio source control When you press the Home button twice, the audio source control keys will be displayed onscreen. Using these keys, you can operate the audio source currently playing in the background without leaving the screen currently displayed. p The audio source control keys cannot be displayed on the iPod audio source screen. Each tap of the key selects whether to mix or mute radio output with the iPhone audio output.
Chapter Basic operation 03 3 Press the Home button. The Application menu screen appears. Basic operation p When you press the Home button on the Application menu screen, the Home screen appears. When you tap [Apps] on the Home screen, the Application menu screen appears. p With the SPH-DA01, depending on the application, the Home screen may be displayed. When a black screen appears A black screen appears when you perform the following operations: ! Tap [Ignore] on the launch application message.
Chapter Using the radio 04 Starting procedure 1 Press the Home button to display the Home screen. 2 Tap [Radio] on the Home screen. 3 Use the touch panel keys on the screen to control the radio. “CT” is set to “ON”. = For details, refer to Receiving date and time data on the next page. Programme service (PS) name is received. 3 iPhone connection status indicator 4 Frequency indicator Reading the screen 1 2 3 Using the touch panel keys Tap or to lower or raise frequencies in one-step increments.
Chapter Using the radio 2 Tap 04 Using radio text . 3 Enter a frequency of your choice and tap [Enter]. 1 Adjust to a frequency you want to register. % Tap 2 RDS functions Tap . 3 Tap the channel of the frequency you want to register. Storing the strongest broadcast frequencies This function automatically assigns frequencies with good reception to the preset channels in the selected band. You can update six channels in each band. Up to 18 channels in the same band can be updated at one time.
Chapter Using the radio 04 ! ON (default): Turns on AF function. ! OFF: Turns off AF function. Limiting stations to regional programming When AF is used to automatically retune frequencies, the regional (REG) function limits the selection to stations broadcasting regional programmes. 1 Tap to open the optional menu. 2 Tap [REG]. Each tap of [REG] changes the setting as follows: ! ON (default): Turns on REG function. ! OFF: Turns off REG function.
Chapter Using the radio 04 PTY list Type of programme News News Affairs Current affairs Info General information and advice Sports Sports Education Educational programmes Drama All radio plays and serials Culture National or regional culture Science Nature, science and technology Variety Light entertainment Pop Popular music Rock Contemporary modern music Easy Easy listening music Light Light classical music Classical Serious classical music Other Non categorised music Weat
Chapter Playing iPod music 05 Starting procedure Using the touch panel keys 1 Connect your iPhone. The launch application message appears. 2 Press the Home button to display the Home screen. 3 Tap [iPod] on the Home screen. or to select an item and tap 4 Tap to complete the selection. When a track is selected, the playback screen is displayed. Reading the screen 1 2 3 ! ! Displays the list screen. When the list screen is displayed, displays the previous list.
Chapter Using hands-free phoning CAUTION For your safety, avoid talking on the phone as much as possible while driving. For details about the connectivity with the devices featuring Bluetooth wireless technology, refer to the information on our website. Registering and connecting an iPhone p For details on the iPhone operating procedures, refer to the iPhone User Guide. p Before registration, make sure that “Bluetooth” in the optional menu is set to “ON”.
Chapter Using hands-free phoning 06 Using the touch panel keys Inputs the dial number. ! ! Initiates a call. When there is an incoming call, connects the call. ! ! Disconnects a call. When a call is being placed, cancels the call. When there is an incoming call, rejects the call. ! Each tap of the key switches between phone audio output from the speakers and output from the iPhone. Each tap of the key turns the microphone on and off. 2 Tap the number keys to enter the phone number.
Chapter Using hands-free phoning Answering an incoming call 2 Tap [Auto Connect]. Each tap of [Auto Connect] changes the setting as follows: ! ON (default): Activates the Bluetooth auto connect function. ! OFF: Deactivates the Bluetooth auto connect function. Answering a call automatically # If you tap , an incoming call is rejected. The rejected call is recorded in the missed call history list. You can select to enable or disable auto answer for handling incoming calls.
Chapter Using hands-free phoning 06 Transferring the phone book The phone book of an iPhone currently connected to this product via Bluetooth wireless technology can be transferred to the product. p Up to 1 000 contacts can be transferred to this product. Even if the number of the contacts to transfer does not exceed 1 000, the transfer will stop when the total number of the telephone numbers of the transferred contacts exceeds 4 000.
Chapter Setting rear view camera The following two functions are available. The rear view camera feature requires a separately sold rear view camera (e.g. ND-BC5). (For details, consult your dealer.) Rear view camera This product features a function that automatically switches to the full-screen image of the rear view camera installed on your vehicle. When the gearstick is in the REVERSE (R) position, the screen automatically switches to full-screen rear view camera image.
Chapter Customising preferences 08 Customising the audio settings 1 Display the audio settings screen. 2 Tap [EQ]. 1 Press the Home button to display the Home screen. 3 Tap the equaliser you want. 2 Customising the equaliser curves Tap on the Home screen. 3 Tap [Audio Settings]. The audio settings screen appears. 4 Tap the item that you want to change the setting. Using the equaliser The equaliser lets you adjust equalisation to match vehicle interior acoustic characteristics as desired.
Chapter Customising preferences 7 Tap or to select the desired Q factor. You can select the following Q factors: Low: 1 — 1.25 — 1.5 — 2 Mid: 0.5 — 0.75 — 1.0 — 1.25 p Q factor cannot be adjusted when you select “High”. p If you tap [Reset], the setting values of equaliser curve is returned to the default settings. Using balance adjustment 1 Display the audio settings screen. 2 Tap [FAD BAL]. 3 Tap or to adjust front/rear speaker balance.
Chapter Customising preferences 08 Safe Mode For safety reasons, you can limit the functions that are available while your vehicle is in motion. ! ON (default): Activates the safe mode function. ! OFF: Deactivates the safe mode function. Software Version The current version is displayed. = For details of software upgrades, refer to the information on our website. Time settings 1 General settings 1 Display the general settings screen. 2 Tap . Make the following settings.
Chapter Customising preferences 08 2 Tap . Make the following settings. RCA Preout You can set audio output to the rear speakers. ! FULL (default): When no subwoofer is connected to the rear output, select “FULL”. ! Sub.W: When a subwoofer is connected to the rear output, select “Sub.W”. 1 Display the general settings screen. 2 Tap 3 Tap [Keyboard]. . 4 Tap or board layout. to select the desired key- Source level adjustment settings You can set the languages used on the programme.
Chapter Customising preferences 08 Assigning functions to the steering wheel The steering wheel control settings allow you to assign functions to the steering wheel control of the vehicle. 1 Press the Home button to display the Home screen. 2 Tap 3 Tap [Steering Wheel Control]. on the Home screen. 4 Tap the button you want to assign functions to. 5 Tap sign. or to select the function to as- 6 Tap . The screen for setting the voltage appears. Follow the instructions displayed in the screen.
Chapter Returning the AppRadio to the default or factory settings You can return settings or recorded content to the default or factory settings. There are some methods to clear user data, and the situations and the cleared content are different for each method. For information regarding the content that is cleared by each method, see the following descriptions. 09 2 Press the Reset button. Press the reset button on this product with a pointed object such as the tip of a pen.
Appendix Appendix Troubleshooting If you have problems operating this product, refer to this section. The most common problems are listed below, along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorised Pioneer service facility. Problems with this product Symptom Cause Action (Reference) The power doesn’t turn on. This product doesn’t operate. Leads and connectors are incorrectly connected.
Appendix Appendix Symptom Cause Action (Reference) There is no GPS signal. The GPS aerial is in an unsuitable location. The quality of signals from the GPS satellites is poor, causing reduced positioning accuracy. Check the GPS signal reception and the position of the GPS aerial if necessary. Obstacles are blocking signals from The quality of signals from the GPS satellites the satellites. is poor, causing reduced positioning accuracy.
Appendix Appendix Problems with Advanced App Mode screen Symptom Cause Action (Reference) A black screen appears. [Ignore] was tapped in the launch application message. Follow the message to launch AppRadio app. The application was exited on the iPhone during operation. Press the Home button to display the Home screen. A message urging reconnection The iPhone was connected to this is displayed. product with the lock engaged. 30 Engb Unlock the iPhone and reconnect.
Appendix Appendix Positioning technology Positioning by GPS In tunnels or enclosed parking garages When driving among high buildings Handling large errors Positioning errors are kept to a minimum by combining GPS, dead reckoning and map matching. However, in some situations, these functions may not work properly, and the error may become bigger. When positioning by GPS is impossible ! GPS positioning is disabled if signals cannot be received from more than two GPS satellites.
Appendix Appendix ! If you make a slight turn. ! If the road has a series of hairpin bends. ! If there is a parallel road. ! If there is a loop or similar road configuration. ! If there is another road very nearby, such as in the case of an elevated motorway. ! If you take a recently opened road that is not on the map. ! If you drive in zigzags. 32 Engb ! If you take a ferry. ! If you are driving on a long, straight road or a gently curving road.
Appendix Appendix ! If you enter or exit a multi-storey car park or similar structure using a spiral ramp. ! If your vehicle is turned on a turntable or similar structure. ! When you drive around a roundabout. ! When starting driving immediately after starting the engine. Appendix ! If trees or other obstacles block the GPS signals for a considerable period. ! If you drive very slowly, or in a start-andstop manner, as in a traffic jam. ! If you join the road after driving around a large car park.
Appendix Appendix Setting list The customisable settings of this product are listed below. For details about changing each setting, refer to the page for that item. Page Time 24 Summer Time 24 Audio Settings Subwoofer settings Page EQ FAD BAL Page 22 23 General RCA Preout 25 Sub.
Engb 35
PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 5 Arco Lane, Heatherton, Victoria, 3202, Australia TEL: (03) 9586-6300 PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
