Use and Care Manual

- 19 -- 19 -
English
Pioneer Smart Sync connection via wired connection
You can also make the Pioneer Smart Sync connection via USB connection.
1 Press and hold to display the main menu.
2 Press to select [SYSTEM], then press to confirm.
3 Press to select [APP CTL], then press to confirm.
4 Press to select [WIRED], then press to confirm.
Pioneer Smart Sync on the iPhone/Android device starts automatically.
NOTES
• If Pioneer Smart Sync has not been installed on your iPhone/Android device yet, a message that
prompts you to install the application will appear on your iPhone/Android device.
• When you connect a mobile device other than an iPhone/Android device, it may not operate
correctly depending on your mobile device.
• To connect to the Pioneer Smart Sync manually, press and hold .
1 Press to select [APP].
A separately sold parking sensor (e.g. ND-PS1) is required to utilize the parking sensor
function which includes features indicates the distance from objects by sound and unit
display colours.
NOTE
The parking sensor function is only available when the gear shift is in the REVERSE (R) position and
[SENSOR] is set to [Y] in the P.SENSOR settings (page 24).
TIP
• The shortest distance in the detected distance range is applied on the unit's indicator.
Listening to music on your device
Parking Sensor
Sensor functions
Distance to the objective Unit display colour and warning sound
More than 160 cm (More than 60 in.) Green with no sound
160 cm to 90 cm (60 in. to 40 in.) Yellow with a slow intermittent beep sound
90 cm to 40 cm (40 in. to 20 in.) Orange with an intermittent beep sound
Less than 40 cm (Less than 20 in.) Red with a continuous beep sound