SMARTPHONE RECEIVER English SPH-10BT Operation Manual Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Table of Contents Getting Started ........................................................................................ 3 Radio ....................................................................................................... 12 Bluetooth ............................................................................................... 14 Using Pioneer Smart Sync/APP.......................................................... 16 Parking Sensor ............................................................
Getting Started Basic operation English SPH-10BT USB port Smartphone holder Display window Application launch Source (music)/Off Navigation Voice recognition Detach button Phone Message Optional remote control The remote control CD-R510 is sold separately. Frequently used operations Purpose Operation Turn on the power* Press to turn on the power. Press and hold to turn off the power. Adjust the volume Press / Select a source Press repeatedly. Return to the previous display/list Press . .
* When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off. Detaching the front panel Detach Attach Important • Avoid subjecting the front panel to excessive shock. • Keep the front panel out of direct sunlight and high temperatures. • Always store the detached front panel in a protective case or bag.
Operating the smartphone holder WARNING Removing the smartphone holder 1 Detach the front panel (page 4). 2 Pull out the holder by holding the anti slip portion on the edge of the holder until the holder is completely visible. CAUTION Never pull up the holder until the holder is completely visible. 3 Pull up the holder vertically.
English CAUTION Make sure that the line can be seen when the holder is pulled up vertically. 4 Attach the front panel to the unit (page 4). Adjusting the smartphone holder horizontally 1 Slide the holder while the holder is in a horizontal position.
English NOTE Detach the smartphone from the device while adjusting the holder. 2 Pull up the holder. Attaching the smartphone to the holder CAUTION • Depending on the shape of the smartphone, smartphone case or cover, it may not be attachable to the holder. • Be careful not to pinch your fingers. Compatible smartphone size H: 2.28 in. - 6.69 in. (58 mm - 170 mm) W: 2.28 in. - 3.42 in. (58 mm - 87 mm) D: 0.15 in. - 0.39 in. (4 mm - 10 mm) Weight: under 0.55 lbs (0.
English 2 Slide the lower arms position to avoid hitting the lower arm and smartphone buttons against each other. NOTES • Make sure that the smartphone is held properly on the holder. • When the smartphone buttons come in contact with the upper or lower arms, adjust the smartphone’s position or turn the smartphone upside down.
Adjusting the smartphone holder Adjusting the holder angle English The holder angle range: Downward 45° to upward 100° WARNING Do not set the holder where it may (i) interfere with vehicle panels or switches or (ii) impair the driver’s performance. Turning the smartphone holder from a horizontal to a vertical position 1 Rotate the smartphone holder 90° clockwise. CAUTION Be careful to not drop the smartphone when the smartphone is attached to the holder while rotating.
CAUTION Be careful to not drop the smartphone when the smartphone is attached to the holder while rotating. Detaching the smartphone from the holder 1 Pull out the smartphone while pushing up the upper arm with the smartphone. English CAUTION • Be careful to not drop the smartphone. • Do not use the holder when the smartphone is detached. Storing the smartphone holder 1 Detach the front panel (page 4). 2 Fold the holder horizontally. 3 Push the holder completely into the unit.
English 4 Attach the front panel to the unit (page 4). INITIAL settings 1 2 3 4 Press and hold until the unit turns off. Press and hold to display the main menu. Press to select [INITIAL], then press Press to select an option, then press to confirm. to confirm. Menu Item Description SP-P/O Select when there is a full-range speaker connected to the rear speaker output leads and there is a subwoofer connected to the RCA output.
Radio Receiving preset stations Press to select [RADIO]. Press to select the band from [FM1], [FM2], [FM3] or [AM]. Press or English 1 2 3 . TIP The / buttons can be also used to select a preset station when [SEEK] is set to [P.CH] in the FUNCTION settings (page 20). Best stations memory (BSM) The six strongest stations are stored then select the channel by pressing 1 2 3 After selecting the band, press and hold Press to select [FUNCTION], then press Press to select [BSM], then press / .
USB/iPhone® Playing back USB devices (including Android™)/iPhone 1 Open the USB port cover. 2 Plug in the USB device/iPhone using an appropriate cable. NOTES • To automatically switch to USB source when a USB device/iPhone is connected to the unit, set [USB AUT] to [Y] in the SYSTEM settings (page 23). • To use iPhone source, [APP CTL] needs to be swtiched to the appropriate settings (page 23).
Bluetooth Bluetooth connection TIP The next connection to the unit is performed automatically if the Bluetooth device has been connected previously in the following steps. 1 2 3 Turn on the Bluetooth function of the device. Select the unit name shown in the device display. Make sure the same 6-digit number appears on this unit and the device, then select [Y] if the 6-digit numbers displayed on this unit and the device are the same.
To make a phone call This function is only available on Pioneer Smart Sync (page 16). For details, see the application's help section. English To answer an incoming call 1 Press any button when a call is received. TIP When two phones are connected to the unit via Bluetooth and there is an incoming call while one phone is being used for a call, a message will appear in the display. To answer that incoming call, you need to end the existing call.
• When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone automatically. • Depending on the type of Bluetooth audio player you have connected to this unit, operation and information displayed may vary based on availability and functionality. Make a Bluetooth connection with the Bluetooth audio player. Press to select [BT AUDIO] as the source. English 1 2 3 Start playback on the Bluetooth audio player.
For iPhone users This function is compatible with iOS 10.3 or later. You can download Pioneer Smart Sync on iTunes® App Store®. English For Android device users This function is compatible with devices that have Android OS 5.0 or later installed. You can download Pioneer Smart Sync on Google Play™. NOTE Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to their own software design, regardless of the OS version.
– Controlling your connected Bluetooth device Extending the functions of the unit by using the application The following functions, which are unavailable on the unit alone, are available by making a Pioneer Smart Sync connection. Description Using a navigation application You can specify and start the navigation application installed on your device. Message reading You can read messages received from the apps installed on your device.
Pioneer Smart Sync connection via wired connection You can also make the Pioneer Smart Sync connection via USB connection. Press and hold to display the main menu. Press to select [SYSTEM], then press to confirm. Press to select [APP CTL], then press to confirm. Press to select [WIRED], then press to confirm. Pioneer Smart Sync on the iPhone/Android device starts automatically.
• The left/right illumination on the unit shows the distance between the two sensors on the left/right sides and the object. • The colour of the illumination displays the shorter distance of one of the two sensors. English Settings You can adjust various settings in the main menu. NOTE The setting operation from this unit is not available when Pioneer Smart Sync is connected. 1 2 3 Press and hold to display the main menu.
AUDIO settings Menu Item Description EQ Select the preset equalizer curve. • You can only customize the equalizer curve by Pioneer Smart Sync (page 16). English [SUPERBAS], [POWERFUL], [NATURAL], [VOCAL], [APP EQ]*, [CUSTOM1], [CUSTOM2], [FLAT], [VIVID], [DYNAMIC] * [APP EQ] is displayed when the preset equalizer curve that is not available in the unit has been set from Pioneer Smart Sync. FADER*1 Adjust the front and rear speaker balance. • You can adjust the fader by pressing or .
Menu Item Description S.RTRV *1 Not available when [SUB/SUB] is selected in [SP-P/O] in the INITIAL settings (page 11). *2 Not available when [FUL/FUL] is selected in [SP-P/O] in the INITIAL settings (page 11). SYSTEM settings You can also access to these menus when the unit is turned off. Menu Item Description LANG [ENGLISH], [CAN.FRA.], [ESPAÑOL] Select the language to display the text information from a compressed audio file. CLOCK [12H], [24H] Set the clock.
Menu Item Description USB AUT [Y], [N] DISP OFF [Y], [N] Set to off the screen display and all key's illumination. ATT/MUT [MUTE], [ATT] Select mute or attenuate the volume when the volume key is pressed and held. DEV INF Displaying the device information. Information on the connections for each device The available sources differ depending on the setting value. Please set [APP CTL] according to the table for the source you want to use. For details on Pioneer Smart Sync connection, see page 16.
ILLUMINATION settings Menu Item Description COLOR DIMMER [SNC ILM], [SNC CLK], [OFF] Select the way to change the display brightness. [1] to [10] Change the display brightness. The available setting ranges differ depending on [DIMMER]. BRT P.SENSOR settings This setting functions by connecting the parking sensor (sold separately). Menu Item Description SENSOR [Y], [N] Select the parking sensor function on or off. VOLUME Adjust the parking sensor warning volume.
Additional Information The display automatically returns to the normal display. → No operations have been made for about 30 seconds. – Perform an operation. NO XXXX (NO TITLE, for example) → There is no embedded text information. – Switch the display or play another track/file. The sound is intermittent. → You are using a device, such as a cellular phone, that may cause audible interference. – Move electrical devices that may be causing the interference away from the unit.
HUB ERR → The USB device connected via a USB hub is not supported by this unit. – Connect the USB device directly to this unit using a USB cable. ERROR-19 → Communication failed. – Perform one of the following operations, then return to the USB source. • Turn the ignition switch OFF and back to ON. • Disconnect the USB device. • Change to a different source. → iPhone failure. – Disconnect the cable from the iPhone. Once the iPhone’s main menu is displayed, reconnect the iPhone and reset it.
USB device with numerous folder hierarchies. Handling guidelines USB storage device iPhone • Do not leave the iPhone in places with high temperatures. • Firmly secure the iPhone when driving. Do not let the iPhone fall onto the floor, where it may become jammed under the brake or accelerator pedal. • Incompatible text saved on the iPhone will not be displayed by the unit.
Sampling frequency Made for 16 kHz to 48 kHz (LPCM) AAC files Compatible format File extension Sampling frequency Stereo Bit Rate Apple Lossless AAC file bought from the iTunes Store (.m4p file extension) AAC encoded by iTunes .m4a 11.025 kHz to 48 kHz 16 kbps to 320 kbps, VBR Not compatible Not compatible FLAC files • FLAC files may not be playable, depending on the encoder. File extension Sampling frequency Quantization bit rate Channel mode .flac, .fla 8/11.025/12/16/22.05/ 24/32/44.
Example of a hierarchy Folder Compressed audio file Copyright and trademark Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of their respective owners. iTunes Apple and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.
meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance. iPhone and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries. Specifications General Google™, Google Play, Android Google, Google Play and Android are trademarks of Google LLC. T-Kernel 2.
USB USB standard specification: USB 2.0 full speed Maximum current supply: 1.5 A USB Protocol: MSC (Mass Storage Class) AOA (Android Open Accessory) 2.0 File system: FAT12, FAT16, FAT32 MP3 decoding format: MPEG-1 & 2 Audio Layer 3 WMA decoding format: Ver. 7, 8, 9, 9.1, 9.2 (2 ch audio) AAC decoding format: MPEG-4 AAC (iTunes encoded only) (Ver. 10.6 and earlier) FLAC decoding format: v1.2.1 (Free Lossless Audio Codec) WAV signal format: Linear PCM (Noncompressed) FM tuner Frequency range: 87.
© 2019 PIONEER CORPORATION. All rights reserved.
