Installation Instructions

18
5 Zero Calibration
Zero Calibration can be performed using the Cycle Compuｔer SGX-CA500
1 Place the bicycle in a vertical, level position (Both wheels at the same height)using a roller or stand.
2 Rotate the crank at least three times to start up both sensors.
3 Place the crank arm in a vertical position (with the pedals attached)
5.1 Select Zero Calibration.
On the SGX-CA500, press the [Menu] button, then select [Options] -> [Pedaling Settings] ->[ZeroCal].
5.2 Start Zero Calibration (Press [ZeroCal])
If successful, the [Result] box will show [Success].
If [Failure] is shown, it is possible that
the crank moved during the
calibration. Please retry with the
crank in a stable position.
Note: