Quick Guide
New Installation Procedure • A new installation procedure is available for SGY-PM90 and SGY-PM68 Series cranksets. • The newest firmware for the SGX-CA500 is required for use with these cranksets – 2.43 • Compatible cranksets will have an orange sticker on the box and another on one of the crank arms. • An updated owners manual will be included in those systems. • Units not displaying this orange sticker should follow the installation instructions found in the owners manual provided with that product.
Easy Installation Power Meter Cranksets SGY-PM90 and SGY-PM68 with Non-Pioneer ANT+ Cycle Computer 1.) Magnet Placement • • • Measuring from the center of the bottom bracket out, temporarily tape the magnet so that the center line of the magnet is: • Right Drive Side - 42mm • Left Side - 53mm Use the supplied Magnet Placement Template to help locate the optimum locations for magnet placement on the frame.
Easy Installation Power Meter Cranksets SGY-PM90 and SGY-PM68 with Pioneer Cycle Computer • Magnet Placement 1. Measuring from the center of the bottom bracket out, temporarily tape the magnet so that the center line of the magnet is: • Right Drive Side - 42mm • Left Side - 53mm 2. Use the supplied Magnet Placement Template to help locate the optimum locations for magnet placement on the frame. 3. Position the magnets so the sensor line and magnet center line are parallel when the sensor passes over.
SGX-CA500 Pairing with a Power Meter Pioneer Power Meter Other ANT+ Power Meters Press Or Enter device number listed on side of left transmitter
SGX-CA500 Zero Calibration Zero Calibration is required to adjust for changes in crank deflection at different temperatures. Pioneer power meters provide 6 temperature memories loaded each time temperature varies 4 degree’s centigrade.
SGX-CA500 Pageset Select / Pageset Edit Pageset Select Pageset Edit Press and Hold Or Grey data fields = Vector & Torque Graphics For Pioneer Power Meter Change Pageset Default Pageset 1 for Pioneer Power Meter use Grey & White data fields = 200 Unique Metrics – All ANT+ Connected Devices Edit Pageset 1 Default Pageset 2 for ANT+ / Other Power Meter Select from 1 – 6 Pages Select up to 16 Layout Options per page Grey = Graphic or Numerical White = Numerical Only
Wifi Ride Upload 1.) Connect to your WiFi Network 2.) Create a Cyclo-Sphere Account With an E-mail and Password 4.) Charge your Computer before every ride… Start https://cyclo-sphere.com/ 3.) Provide your Cycle Computer with your Cyclo-Sphere E-mail and Password for Auto Upload Train n Race Stop Reset X 3 sec. You can enter multiple wifi spots ie., your home, Starbucks… Hold Back Button to return to the upload section Ride data will auto-upload to Cyclo-Sphere when in range of your wifi networks.
Firmware Update Update Firmware via Wi-Fi Menu Cyclo-Sphere will announce new firmware and provide details of the updates.
Cyclo-Sphere How to Use Cyclo-Sphere https://cyclo-sphere.com Basic E-Mail and Password User name… You’re In! * Cyclo-Sphere is optimized for Pioneer Cycle-Sports computers and Power Meters but works great with any ANT+ Cycle Computers, Power Meters, Cadence / Speed, and Heart Rate Sensors.
Search / Files Quick Return to My Workouts Calendar Ride Access Upload Files Allows “uploading” of .FIT files stored on your PC for Cyclo-Sphere analysis and auto-forwarding to Strava Return to Default Layout Download Files Windows can be moved during analysis Converts Pioneer .db files into .FIT files and “downloads” them to your PC for later “upload” to other Cycling analysis websites ie. Training Peaks, Garmin, Strava, MapMy Ride, etc.
Workout List Change Metric in column Add Column
Statistics – Ride Group Charts & Graphs Create New Parameter Group Chart Edit Groups Manual FTP Entry Manual Weight Entry Color Coded Power Zones User Created “Training”
GPS – Maps & Route History Green = All Rides Red = Selected Ride
MMP – Mean Maximum Power MMP = Mean Maximum Power For increasing intervals of time Select Up to 4 Rides or Ride Groups To view and compare FTP = Max Power Avg.
Individual Ride Analysis Ride Summary Laps Segments Ride MMP Vs.
Auto “Forward” to STRAVA, Training Peaks, Facebook & Twitter My Workouts Link and Forward to Strava Enter Strava Account address and password.
Post Ride Analysis to STRAVA, Training Peaks, Facebook & Twitter Post a single event Auto-Forward My Workouts Profile Settings Web Link Twitter and Facebook • Select Auto Forward • Select Private or Public
Make STRAVA Public Laptop / PC: Go to Dashboard Activity Feed Click on your ride Click on the “Edit this Activity” pen Un-Click Private or Strava App: Click Feed Click the date or Map Click on the “Edit this Activity” pen Click on the lock icon
Resources Comments and Questions, E-Mail to: cycle-sports@pioneer-usa.com N. America Site www.pioneerelectronics.com/PUSA/ www.powerisking.com Global Site: http://pioneer-cyclesports.com/us-en/ https://cyclo-sphere.com/ Magnet Calibration Installation Video http://www.youtube.com/watch?v=w4k F4Zx1bqk&feature=youtu.
