Owner's Manual

45
EN
Settings
Cyclocomputer Settings
Built-in Flash Memory Format
Format the built-in ash memory.
All data in the built-in ash memory will be erased when it is •
formatted.
When the device is connected to the PC with USB cable, •
Disconnect it before you format the ash memory.
1
Tap [Settings] icon on the home screen.
2
Tap [System] - [Memory Format].
The conrmation message is displayed to check if you
format it or not.
3
Tap [OK].
The format starts.
When the format is completed, the message is displayed.
Tap [OK] to nish the format.