Instruction Manual

-16-
NO.
Issues
Reasons
Solutions
1
Incorrect connection or pins
not making contact
LED light is broken Replace LED light
2
Make sure the LED indicator with
RED color is on driver side and
YELLOW is on the passenger side,
also the sensor with
RED color is on
driver side YELLOW is on the
passenger side
Make sure the signal wires are
connecting correctly
3
4
5
Troubleshooting
LED light does not
work
Check the
sure connection is correct
harness and make
Opposite LED
indicator
Microwave sensor or LED
indicators are plugged in
to the opposite connector
Speaker does not work
Wrong connection or pins
not making contact
Check the harness and make
sure connection is correct
Defective Speaker
Replace Speaker
Sensor or GPS
does not work
Sensor or GPS Antenna module
is covered by the metal
bumper or other metal
Find the best location where the
sensor or GPS Antenna cannot be
blocked by any metal
Unit does not work
Blind spot system does not
trigger the sensor if the speed
is less than 18 mph (29 km/h)
Keep the speed of your vehicle
higher than 18 mph (29 km/h)
6
7
FUSE is blown
Over current / Power surge Exchange FUSE (2 A)
Blind area object
detection not
consistent or unstable
Not Installed correct location
Find the correct location to install
Find the location where the radar
sensing area is not blocked by
objects(s)
Installed with wrong angle
(pointing upward)
Installed at a location with
object in front
English