Instruction Manual

Step 3: LED Indicator Installation
Install the Left LED indicator and Right LED indicator in a location that is visible to the driver, ideally in
or around the vehicle's A-pillars (see Fig 21, Fig 22). Place the LED indicators away from the side curtain
air bags, so as not to hinder the deployment of airbag function. Appropriate placement is usually at the
lowest part of the A-pillars, but you must consult the vehicle manual.
Fig 21
Fig 22
NOTE:
・Changing the LED housing color
The system includes two options for the LED indicator housing. Depending on the customer’s choice
and/or vehicle’s interior color, you may change the LED cover from grey (default) to black.
1. First peel back 3M® tape from the LED indicator housing.
2. Using a small flat head screwdriver, remove the cover.
3. Align wire notch from the new cover, and snap into place.
4. Use the supplied 3M tape and re-apply behind LED.
Step 4: Speaker Installation
While installing the speaker, make sure it is not obstructed by any panels inside the vehicle
(see Fig 23).
NOTE:
To adjust volume on the speaker, toggle the switch to the desired setting, “HI/LOW/OFF”.
-13-
Fig 18
Fig 19
Fig 20
Fig 23
English