Instruction Manual

52 degrees ( ) HorizontalDetection Range
Speed Range 0.5 mph (0.8 km/h) 137 mph (220 km/h)～
Speed Accuracy
< 0.5 mph (0.8 km/h)
Speed Restriction
1. The GPS needs to detect restricted speed to activate
the sensors. There are four speed restriction options:
5 mph (8 km/h) --- Switch Setting 1
10 mph (16 km/h) -- Switch Setting 2
15 mph (24 km/h) -- Switch Setting 3
20 mph (32 km/h) -- Switch Setting 4
Default speed setting is 20 mph (32 km/h).
2. If no GPS signal is detected or satellites not found, the system will be
activated at any speed.
Direction of Movement
Approached by vehicles
Detection Range
1 ft (0.3 m) 50 ft (15 m)～
Operating Voltage 9 18 V～
Waterproof
Working Current
Working Temperature
< 100 mA
-4°F ~ 158°F (-20℃ 70℃)～
Technical Specifications
License Plate Bar: IPX6/IPX7
Other items such as cables and Main Unit: NOT waterproof
5. Pink Left-Turn Signal Trigger - Locate the +12 VDC Isolated turn signal and connect the Left (Pink)
wire from the Main Unit.
6. Connect the power harness into the Main Unit.
7. Make all the appropriate connections (LED’s, Speaker, License Plate Bar) on the Main Unit harness.
8.
9. Test the system’s operation, ensuring that all features operate according to this manual. After
operation is tested, finalize connections and secure wires.
Connect the negative terminal of the battery to the vehicle.
FUSE rating value 2 A
-15-
English