Owner's Manual

7
Pass the other end of the
safety strap through the
gap in the dashboard mount
attachment and fasten the
strap.
Pass the longest loop of the safety strap
through the gap in the dashboard mount
attachment, pass the suction cup surface
mount sheet at the other end through the
loop, and fasten the strap.
8
Peel off the double-sided tape
release paper on the back of
the suction cup surface mount
sheet and affix the suction cup
surface mount sheet to the
dashboard.
•
Affix the suction cup surface mount sheet
to the desired mounting position.
•
Wipe clean and dry the affixing location
before affixing.
•
After affixing the suction cup surface
mount sheet, firmly press the entire
affixing surface to push out any air.
•
Select the following location to affix the
suction cup surface mount sheet.
* Smooth and level location on the
dashboard
* Location where the entire suction
surface can be affixed
9
Raise the suction surface lock
lever.
10
Peel off the film from the
suction surface and place the
suction surface on the suction
cup surface mount sheet.
11
Lower the suction surface
lock lever to lock the suction
surface in place.
Move the product up, down, left, and right to
check that it does not rattle.