WIRELESS CHARGING CRADLE SDA-SC510 Owner’s Manual Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference. Always read and follow the “Safety Precautions” described in this manual when installing this product in a vehicle.
Precaution Certain country and state laws may prohibit or restrict the placement and use of this product in your vehicle. Please comply with all applicable laws and regulations regarding the use, installation and operation of this product. It is the user’s responsibility to comply with all applicable laws, rules, regulations and ordinances. This device complies with part 15 of the FCC Rules.
• Any obstruction of or other interference with the airbag, either deployed or non-deployed, or with the clear view of the road must be avoided. Important safety information WARNING If liquid or foreign matter should get inside this product, park your vehicle in a safe place, turn the ignition switch off (ACC OFF) and unplug the cigarette lighter plug immediately, and consult your dealer or the nearest authorized Pioneer Service Company.
wireless charger and compatible device. A fire, burn, or injury may occur. • Never move a credit card or other magnetic card, magnetic recording media, or other magnetized item near the charging area. Magnetic data may be deleted. • Never place a watch or other precision device near the charging area as failure may occur. • Remove any cover or other item attached to the compatible device before charging with the wireless charger.
Features • • • • • • This product is a wireless charging cradle that uses electromagnetic induction technology. You can release the cradle lock with a single touch to remove your smartphone. Your smartphone is removable even when the vehicle’s engine is off thanks to an electric doublelayer capacitor (storage capacitor). This product is compliant with the Qi wireless charging standard. Any product compliant with Qi can be charged by simply placing it in this product.
USB charger Connector No. of ports (Port name) Input Operating temperature range Output USB A connector female 2 (USB1 (green port) / USB2 (white port)) 12 V / 24 V DC -10 °C to +50 °C (14 °F to +122 °F) USB1 (green port) : 5 V / 3 A, 9 V / 2 A, or 12 V / 1.5 A DC USB2 (white port) : 5 V • 2.4 A DC 30 W Max.
Part Names Air conditioner vent mount attachment Charging lamp Unlock sensor Sliding arms Power button Lock sensor Smartphone holder adjustment nut Power lamp USB input port (USB Type-C) Smartphone holder Before Installing the Product Precautions for installing this product in the vicinity of the dashboard Observe the following points. • Do not block the view ahead. • Do not block the view immediately in the front and at the sides. • Do not obstruct air bag system operation.
Installation This product can be mounted to either an air conditioner vent or the dashboard. Mounting to Air Conditioner Vent CAUTION • Some vehicle side vents defrost the side windows, so blocking those vents may decrease visibility in cold locations. Do not mount on a side vent that defrosts the side window. and fix the clip in an air 4 Insert conditioner vent.
Installation Mounting to Dashboard • Protective film is affixed to the suction surface (back side) of the suction cup. Do not peel off the film until step 10. If the suction surface of the suction cup becomes dirty, the suction power will be reduced and the product may fall. Select the following location to install the product. If the product is not installed correctly, it will fall, etc.
7 Pass the other end of the safety strap through the gap in the dashboard mount attachment and fasten the strap. • After affixing the suction cup surface mount sheet, firmly press the entire affixing surface to push out any air. • Select the following location to affix the suction cup surface mount sheet.
Connecting 1 Insert the supplied USB charger into the vehicle’s cigarette lighter socket. Cigarette lighter socket For fast charging, please use the USB1 (green port) of the included USB charger. The USB2 (white port) is not compatible with fast charging. Fast charging may not be possible with a charging port fitted to the vehicle as standard or a commercially available USB charger with an insufficient voltage/current because USB output equivalent to the product input specification is required.
Turning the Power On and Off Turning the Power On 1 Press the power button. The power lamp (blue) lights. For details on illumination status, see “Product Status Display”. Power button Power lamp • Normally, when the vehicle’s engine is turned on (ACC ON), power is supplied from the USB charger and the product power turns on automatically. • When the product power on state continues for 5 minutes after power stops being supplied from the USB charger, the product power will turn off automatically.
Inserting and Removing a Smartphone Inserting a Smartphone and hold the unlock 1 Touch sensor. Note Take precaution that your hand does not get caught between the phone and the sliding arms when the sliding arms are closing. Once a compatible smartphone is inserted, wireless charging will start automatically. The charging lamp will illuminate during charging. For details on illumination status, see “Product Status Display”. Unlock sensor The sliding arms widen automatically.
Removing a Smartphone and hold the unlock 1 Touch sensor. The sliding arms widen automatically. 2 Removing a Smartphone When the power turns off, the sliding arms close automatically.
Product Status Display Power Lamp Display The product status is indicated by the lighting/flashing state. Status Display Storing Flashing blue Storing complete Solid blue Power off Off Charging Lamp Display The wireless charging status of the smartphone is indicated by the lighting/flashing state. The charging lamp may not turn off after charging completes depending on the smartphone you are using.
Troubleshooting Check the following information before sending the product in for service. Symptom Cause No charge is stored in the product. Connect the USB cable and check that the power lamp of the product lights or flashes. The connection of the supplied USB charger is poor. Reinsert the USB charger into the cigarette lighter socket. Power does not turn on. Sliding arms do not open even when touching and holding the unlock sensor.
PIONEER ELECTRONICS (USA) INC. LIMITED WARRANTY WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE WARRANTY Pioneer Electronics (USA) Inc. (Pioneer) warrants that Pioneer® Car/Marine Electronics, Speaker, and Accessory Products distributed by Pioneer in the U.S.A.
PIONEER ELECTRONICS (USA) INC. GARANTIE LIMITÉE GARANTIE VALIDE UNIQUEMENT DANS LE PAYS D’ACHAT DU PRODUIT GARANTIE Pioneer Electronics (USA) Inc.
