Specification Sheet

FirmwareUpdate
UpdatingviaUSB
Preparation:
Preparea128MBorlargerUSBstoragedevice.FAT16orFAT32filesystem
format.
– MediainsertedinaUSBcardreadermaynotbeusedforthisfunction.
– USBstoragedeviceswithsecurityfunctionarenotsupported.
– USBhubsandUSBdeviceswithhubfunctionarenotsupported.Donot
connectthesedevicestotheunit.
DeleteanydatastoredontheUSBstoragedevice.
Turnoffthecontrollercomponent(PCetc.)connectedtothenetwork.
StopanyplayingInternetradio,USBstoragedevice,orservercontent.
Ifthemultizonefunctionisactive,turnitoff.
If"HDMICEC"issetto"On",setitto"Off".
– Press ontheremotecontrollertodisplaytheHomescreen.Next,select
"SystemSetup""Hardware""HDMI",pressENTER,select"HDMICEC"
andselect"Off".
＊ SomeUSBstoragedevicesmaytakelongtoload,maynotbeloaded
correctly,ormaynotbecorrectlyfeddependingonthedeviceortheir
content.
＊ Ourcompanywillnotbeliablewhatsoeverforanylossordamageofdata,
orstoragefailurearisingfromtheuseoftheUSBstoragedevicewiththis
unit.Thankyouforyourunderstanding.
＊ Thedescriptionmaydifferfromtheonscreendisplaybutthatwillnot
changethewaytooperateorthefunction.
Update
1. ConnecttheUSBstoragedevicetoyourPC.
2. Downloadthefirmwarefilefromourcompany'swebsitetoyourPCandunzip.
Firmwarefilesarenamedinthefollowingway:
PIOAVR＊＊＊＊_＊＊＊＊＊＊＊＊＊＊＊＊.zip
UnzipthefileonyourPC.Thenumberofunzippedfilesandfoldersvaries
dependingonthemodel.
3. CopyallunzippedfilesandfolderstotherootfolderoftheUSBstoragedevice.
Makesuretocopytheunzippedfiles.
4. ConnecttheUSBstoragedevicetotheUSBportoftheunit.
IfyouconnectaUSBharddiskdrivetotheUSBportoftheunit,we
recommendthatyouuseitsACadaptertopowerit.
Settings