Specification Sheet

FirmwareUpdate
UpdatingtheFirmwareviaNetwork
Preparation:
Checkthattheunitisturnedon,andtheconnectiontotheInternetissecured.
Turnoffthecontrollercomponent(PCetc.)connectedtothenetwork.
StopanyplayingInternetradio,USBstoragedevice,orservercontent.
Ifthemultizonefunctionisactive,turnitoff.
If"HDMICEC"issetto"On",setitto"Off".
– Press ontheremotecontrollertodisplaytheHomescreen.Next,select
"SystemSetup""Hardware""HDMI",pressENTER,select"HDMICEC"
andselect"Off".
＊ Thedescriptionmaydifferfromtheonscreendisplaybutthatwillnot
changethewaytooperateorthefunction.
Update
1. Press ontheremotecontroller.
TheHomescreenisdisplayedontheTVscreen.
2. Select"SystemSetup""Miscellaneous""FirmwareUpdate""Updatevia
NET"withthecursorsinorder,thenpressENTER.
If"FirmwareUpdate"isgrayedoutandcannotbeselected,waitforawhile
untilitstartsup.
Youwillnotbeabletoselect"UpdateviaNET"ifthereisnothingtoupdate.
Settings