Specification Sheet

Network/Bluetooth
MakesettingsrelatedtonetworkconnectionsandBLUETOOTH.
Operation:
Usetheonscreendisplays(OSD)thatappearontheTVtomakethesettings.
Press ontheremotecontrollertodisplaytheHomescreen,select
Network/Bluetoothwiththecursorsontheremotecontroller,thenpressENTER.
Selecttheitemwiththecursor / / / buttonsoftheremotecontrollerandpress
ENTERtoconfirmyourselection.
Usethecursors / tochangethedefaultvalues.
Toreturntothepreviousscreen,press .
Toexitthesettings,press .
Network
WhenLANisconfiguredwithaDHCP,set"DHCP"to"Enable"toconfigurethe
settingautomatically.("Enable"issetbydefault.)ToassignfixedIPaddresses
toeachcomponents,youmustset"DHCP"to"Disable"andassignanaddress
tothisunitin"IPAddress"aswellassetinformationrelatedtoyourLAN,such
asSubnetMaskandGateway.
WiFi
DefaultValue:Off(Wired)
ConnecttheunittonetworkviawirelessLANrouter.
"On":WirelessLANconnection
"Off(Wired)":WiredLANconnection
WiFiSetup
DefaultValue:‐
YoucanconfigurewirelessLANsettingsbypressingENTERwhen"Start"is
displayed.
Settings