Specification Sheet

Whenputtingthespeakersetupmicrophoneonatripod,refertotheillustration
whenputtingitinplace.
TocancelFullAutoMCACCpartwaythrough,disconnectthespeakersetup
microphone.Youcannotuseanyothermenuoptionswhileitisconnected.
2. Selecttheconnectedspeakerconfiguration.
Theimageonthescreenchangesasyouchoosethenumberofchannelsin
"SpeakerChannels",sorefertoitwhenperformingthesettings.
Usethisscreentoselectwhetheryouhaveconnectedasubwooferandto
selectthetypeofheightspeaker,etc.
Ifyouhaveconnectedasubwoofer,checkthepowerandvolumeofthe
subwoofer.Thelowfrequenciesplayedbythesubwoofermaynotbe
discernible,sosetitsvolumetoatleasthalfway.
3. Testtonesareemittedbythespeakers,andfirstlytheunitdetectsthespeakers
connectedandthenoiseintheenvironment.
4. Aftertheresultsoftheabovemeasurementsaredisplayed,select"Next",press
ENTERontheremotecontroller,andthetesttonesareemittedagain,andthe
unitautomaticallymakessettingssuchastheoptimumvolumelevelandthe
crossoverfrequency.
5. Whenthemeasurementiscompleted,themeasurementresultisdisplayed.
Pressthecursors / ontheremotecontrollertocheckthesettings.Press
ENTERwhen"Save"isselectedtosavethesettings.