Specification Sheet

Aspeakerproducesnosound
Makesurethatthepolarityofthespeakercables(＋/－)iscorrect,andthatno
barewiresareincontactwiththemetalpartofspeakerterminals.
Makesurethatthespeakercablesarenotshorting.
Checkin"ConnecttheSpeakers"intheBasicManualthatthespeaker
connectionshavebeenmadecorrectly.Settingsforthespeakerconnection
environmentneedtobemadein"FullAutoMCACC"inInitialSetup.Checkin
"InitialSetup"intheBasicManual.
Dependingonthesourceandcurrentlisteningmode,notmuchsoundmaybe
producedbythesurroundspeakers.Selectanotherlisteningmodetoseeif
soundisoutput.
Ifyouareinstallingsurroundbackspeakers,surroundspeakersarerequired.
Amaximumof5.1chplaybackispossiblewhenBiAmpingconnectionisused.
Further,makesureyouremovethejumperbaronthespeakerswhenusingBi
Ampingconnection.
Troubleshooting