Owner's Manual

< 5 > < 6 > < 7 > < 8 >
Specifications
This product
Input Max. 5 V / 2 A, 9 V / 1.67 A, or 12 V / 1.67 A
Output Android
TM
max 10 W, iPhone max 7.5 W / Minimum 5 W
Input port USB Type-C
®
female
Frequency Range 110 kHz to 205 kHz
Operating temperature range -10 °C to +50 °C (14 °F to +122 °F)
Charging efficiency ≥70%
Possible electric power
transmission distance
≤6.0mm
External dimensions (W x H x D) 66.8 mm x 120 mm x 24.5 mm (2-5/8 in. x 4-3/4 in. x 1 in.)
Product weight Approx. 140 g (5 oz)
•
Qi is a registered trademark of the Wireless Power Consortium.
•
Qualcomm Quick Charge is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm
and Quick Charge are trademarks or registered trademarks of Qualcomm Incorporated. Permission has been
obtained to use all Qualcomm marks.
•
Android is a trademark of Google LLC.
•
iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.
•
USB Type-C
®
and USB-C
®
are registered trademarks of USB Implementers Forum.
•
Pioneer is a registered trademark of Pioneer Corporation.
Trademarks & Copyrights
Wireless Charging Cradle
×1
USB Type-C Cable ×1 USB charger
×1
Air conditioner vent
mount attachment ×1
Dashboard mount
attachment ×1
Safety strap ×1 Suction cup surface
mount sheet ×1
Owner’s Manual ×1
Checking the Contents of the Package
Part Names
Air conditioner vent
mount attachment
Smartphone holder
adjustment nut
USB input port
(USB Type-C)
Unlock sensor
Lock sensor
Charging lamp
Sliding arms
Power button
Power lamp
Smartphone holder
Precautions for installing this product in the vicinity of the
dashboard
Observe the following points.
•
Do not block the view ahead.
•
Do not block the view immediately in the front and at the sides.
•
Do not obstruct air bag system operation.
•
Install where there will be little eye movement for navigation purposes during driving.
•
Do not install in the following locations.
* Front windscreen
* Where rain is likely to get on the product
* Where baggage and other objects will bump into the product
•
Always use the parts supplied with the product as specified. Using other than the specified parts
may result in damage to components inside the device or the product falling due to not being firmly
secured.
Before Installing the Product
Installation
This product can be mounted to either an air conditioner vent or the dashboard.
Mounting to Air Conditioner Vent
CAUTION
• Some vehicle side vents defrost the side
windows, so blocking those vents may
decrease visibility in cold locations. Do not
mount on a side vent that defrosts the side
window.
1
Turn the nut counterclockwise
and remove it.
2
Assemble the air conditioner
vent mount attachment and
nut, and insert them into
the attachment hole of the
product.
3
Fix them in place by turning
the nut clockwise.
4
Insert and fix the clip in an air
conditioner vent.
Firmly press the lock button on the air
conditioner vent mount attachment to release
the lock and then open the air conditioner
louvre (slats) and attach the product to the air
vent.
When attaching the product to an air
conditioner vent, take care not to damage the
air conditioner louvre (slats).
Removing from Air Conditioner Vent
Firmly press the lock button on the air conditioner
vent mount attachment to release the lock and then
remove the product from the air vent.
When removing the product from an air
conditioner vent, take care not to damage the
air conditioner louvre (slats).
USB charger
Connector USB A connector female
No. of ports 2
Input 12 V / 24 V DC
Operating temperature range -10 °C to +50 °C (14 °F to +122 °F)
Output
5 V / 3 A, 9 V / 2A, or 12 V / 1.5 A DC
(Quick Charge 3.0 Standard)
Max. output 30 W
Features
•
This product is a wireless charging cradle that uses electromagnetic induction technology.
•
You can release the cradle lock with a single touch to remove your smartphone.
•
Your smartphone is removable even when the vehicle’s engine is off thanks to an electric double-
layer capacitor (storage capacitor).
•
This product is compliant with the Qi wireless charging standard.
•
Any product compliant with Qi can be charged by simply placing it in this product.
•
Quick charging can be performed in fast wireless charging mode at 10 W.
— Can be used by connecting to a USB charger compatible with Qualcomm
®
Quick Charge™ 2.0 Tech-
nology or higher.
— Smartphones compatible with 5 W or higher wireless charging are supported.
— Charging at 5 or 7.5 W is possible for iPhone
®
, and charging at 5, or 10 W depending on the specifica-
tions of the smartphone is possible for Android™. (Must be compliant with the Qi standard.)
— There is no guarantee that charging or quick charging will be possible with all models. (For quick
charging, a unique standard may be used depending on the smartphone. In such a case, charging
will be limited to a maximum of 5 W.)