User manual

42
Connecting your equipment
03
Secondary MULTI-ZONE setup using speaker terminals (ZONE 3)
You must select 5.2 +ZONE 2+ZONE 3 in Speaker system setting on page 103 to use this setup.
% Connect a pair of speakers to the front wide speaker terminals.
R
Sub zone (ZONE 3) Main zone
L
B
FRONT WIDE /
RL
B
FRONT WIDE /
RL
MULTI-ZONE setup using HDMI terminal (HDZONE)
Important
! MAIN/HDZONE at ZONE Setup must be set to HDZONE in order to use the HDZONE function (page 109 ).
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see HDMI
Setup on page 75 .
% Connect a separate receiver to this receiver’s HDMI OUT 3 terminal.
Connect speakers and a TV to the HDZONE receiver as shown on the illustration below.
OUT 3
(HDZONE)
OUT 2OUT 1
(CONTROL)
SELECTABLE
OUT 3
(HDZONE)
OUT 2OUT 1
(CONTROL)
SELECTABLE
HDMI IN
Sub zone (HDZONE) Main zone
Multi-zone connection using the HDMI terminal and speaker terminals (HDZONE)
Important
! The settings must be changed at ZONE Setup in order to use the HDZONE function (page 109 ).
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see HDMI
Setup on page 75 .
! You must select HDZONE in Speaker system setting (page 103 ) to use this setup.
1 Connect the speaker to the front wide speaker terminal or surround back speaker terminal.
Which speaker terminal is connected defers depending on the Speaker System (page 103 ) setting. For details,
see Installing your speaker system on page 26 .
The following figure shows the connection of the surround back speaker terminal.
2 Connect a TV monitor to the HDMI OUT 3 (HDZONE) terminal on this receiver.
(Single)
A
SURROUND BACK
RL
OUT 3
(HDZONE)
OUT 2OUT 1
(CONTROL)
SELECTABLE
R
Sub zone (HDZONE) Main zone
L
(Single)
A
SURROUND BACK
RL
OUT 3
(HDZONE)
OUT 2OUT 1
(CONTROL)
SELECTABLE
HDMI IN
2
1