User manual

39
> Specifications > Settings > Listening Modes > Playback Function > Basic Manual
Troubleshooting | Appendix
Setting Item Default Value Setting Details
Surr Back Right 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
/
, adjust
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" (in 0.5 dB intervals) with / .
To readjust the overall volume balance with "Trim",
select "Trim" in
/
, and use
/
to adjust the
volume.
•
If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
•
"63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surr Back Left 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
/
, adjust
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" (in 0.5 dB intervals) with
/ .
To readjust the overall volume balance with "Trim",
select "Trim" in
/
, and use
/
to adjust the
volume.
•
If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
•
"63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Setting Item Default Value Setting Details
Surround Left 0 dB After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors
/
, adjust
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" (in 0.5 dB intervals) with / .
To readjust the overall volume balance with "Trim",
select "Trim" in
/
, and use
/
to adjust the
volume.
•
If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
•
"63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" -
"Crossover".
Subwoofer 1 0 dB After selecting the speaker frequency from between
"31 Hz" and "250 Hz" with the cursors
/
, adjust
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" (in 0.5 dB intervals) with
/ .
To readjust the overall volume balance with "Trim",
select "Trim" in
/
, and use
/
to adjust the
volume.
•
If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.
Subwoofer 2 0 dB After selecting the speaker frequency from between
"31 Hz" and "250 Hz" with the cursors
/
, adjust
the volume of that frequency between "−12.0 dB"
and "＋12.0 dB" (in 0.5 dB intervals) with / .
To readjust the overall volume balance with "Trim",
select "Trim" in
/
, and use
/
to adjust the
volume.
•
If "OVER!" is displayed during adjustment,
the volume of the frequency band or another
frequency band is too high, so reduce the
volume of the frequency bands until the display
disappears.