User manual

25
> Specifications > Settings > Listening Modes > Playback Function > Basic Manual
Troubleshooting | Appendix
Setting Item Default Value Setting Details
USB Off Set the 12V trigger output setting to each input.
•
To use this function, set "HDMI Out" to "Off" in
advance.
"Off": No output
"Main": Output when "USB" is selected as input
source for the main room.
"Zone2": Output when "USB" is selected as input
source for ZONE2.
"Zone3": Output when "USB" is selected as input
source for ZONE3.
BT AUDIO Off Set the 12V trigger output setting to each input.
•
To use this function, set "HDMI Out" to "Off" in
advance.
"Off": No output
"Main": Output when "BT AUDIO" is selected as
input source for the main room.
"Zone2": Output when "BT AUDIO" is selected as
input source for ZONE2.
"Zone3": Output when "BT AUDIO" is selected as
input source for ZONE3.
■ 12V Trigger B
Set when outputting the control signal (maximum 12 V/25 mA) through the 12V TRIGGER
OUT B jack. Different settings can be set for each input selector. You can enable power link
operation when you connect the unit and the external devices equipped with 12V trigger
input jack.
Setting Item Default Value Setting Details
HDMI Out Off Set when you want to output a 12V trigger in
response to switching of an HDMI OUT jack that
outputs video.
"Off": No output
"MAIN": Output when switched to the HDMI OUT
MAIN jack.
"SUB": Output when switched to the HDMI OUT
SUB jack.
•
This can be selected only when "System Setup"
- "Input/Output Assign" - "TV Out/OSD" - "Zone
2 HDMI" is set to "Not Use".
"ZONE 2": Output when switched to the HDMI OUT
ZONE 2 jack.
•
This can be selected only when "System Setup"
- "Input/Output Assign" - "TV Out/OSD" - "Zone
2 HDMI" is set to "Use".
BD/DVD Off Set the 12V trigger output setting to each input.
•
To use this function, set "HDMI Out" to "Off" in
advance.
"Off": No output
"Main": Output when "BD/DVD" is selected as input
source for the main room.
"Zone2": Output when "BD/DVD" is selected as
input source for ZONE2.
"Zone3": Output when "BD/DVD" is selected as
input source for ZONE3.