User manual

41
Connecting your equipment
03
MULTI-ZONE setup using speaker terminals (ZONE 2)
You must select ZONE 2 in Speaker system setting (page 102 ) to use this setup.
% Connect a pair of speakers to the surround back speaker terminals.
You should have a pair of speakers attached to the surround back speaker terminals as shown below.
(Single)
A
SURROUND BACK
RL
R
Sub zone (ZONE 2) Main zone
L
(Single)
A
SURROUND BACK
RL
Secondary MULTI-ZONE setup (ZONE 3)
% Connect a separate amplifier to the AUDIO ZONE 3 OUT jacks on this receiver.
You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
ZONE 3
OUT
ZONE 3
OUT
RL
AUDIO IN
Sub zone (ZONE 3) Main zone
Secondary MULTI-ZONE setup using speaker terminals (ZONE 3)
You must select 5.2 +ZONE 2+ZONE 3 in Speaker system setting on page 102 to use this setup.
% Connect a pair of speakers to the front wide speaker terminals.
B
FRONT WIDE /
RL
R
Sub zone (ZONE 3) Main zone
L
B
FRONT WIDE /
RL
MULTI-ZONE setup using HDMI terminal (HDZONE)
Important
! MAIN/HDZONE at ZONE Setup must be set to HDZONE in order to use the HDZONE function (page 108 ).
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see HDMI
Setup on page 74 .
% Connect a separate receiver to this receiver’s HDMI OUT 3 terminal.
Connect speakers and a TV to the HDZONE receiver as shown on the illustration below.
OUT 3
(HDZONE)
OUT 2OUT 1
(CONTROL)
SELECTABLE
OUT 3
(HDZONE)
OUT 2OUT 1
(CONTROL)
SELECTABLE
HDMI IN
Sub zone (HDZONE) Main zone