User manual

21
> Specifications > Advanced Setup > Listening Modes
> Network Functions > Basic Manual
|Troubleshooting Supplementary Information, etc.
Setting Item Default Value Setting Details
PHONO Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "PHONO" is selected as input
source for the main room.
"Zone2": Output when "PHONO" is selected as
input source for ZONE2.
TUNER Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "TUNER" is selected as input
source for the main room.
"Zone2": Output when "TUNER" is selected as
input source for ZONE2.
NET Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "NET" is selected as input
source for the main room.
"Zone2": Output when "NET" is selected as input
source for ZONE2.
USB Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "USB" is selected as input
source for the main room.
"Zone2": Output when "USB" is selected as input
source for ZONE2.
BLUETOOTH Off Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "BLUETOOTH" is selected as
input source for the main room.
"Zone2": Output when "BLUETOOTH" is selected
as input source for ZONE2.
Multi Zone
Make settings related to Multi-zone Connection, such as the volume for the separate room.
■ Zone 2
Setting Item Default Value Setting Details
Output Level Fixed Select whether to adjust the volume on the pre-
main amplifier in the separate room or on this unit
when outputting to Zone 2.
"Fixed": Adjust on the pre-main amplifier in the
separate room
"Variable": Adjust on this unit
Volume Limit Off Set the maximum value for Zone 2 to avoid too
high volume. Select "Off" or a value between "−32
dB" and "＋17 dB".
Power On Level Last Set the Zone 2 volume level of when this unit is
turned on. Select a value from "Last" (volume
before the unit was turned off), "−󲍤 dB", and "−
81.5 dB" to "＋18.0 dB".
•
You cannot set a higher value than that of
"Volume Limit".
Bass 0 dB Adjust the volume of the bass for Zone 2. Select a
value between "−10 dB" and "＋10 dB".
Treble 0 dB Adjust the volume of the treble for Zone 2. Select a
value between "−10 dB" and "＋10 dB".
Balance 0 Set the left-right balance for Zone 2. Select a value
between "L ＋ 10" to "R ＋ 10".