User manual

10
> Specifications > Advanced Setup > Listening Modes
> Network Functions > Basic Manual
|Troubleshooting Supplementary Information, etc.
Setting Item Default Value Setting Details
GAME Use Set whether to skip the GAME input selector.
Select "Skip" to skip this input.
STRM BOX Use Set whether to skip the STRM BOX input selector.
Select "Skip" to skip this input.
HDMI 5 Use Set whether to skip the HDMI 5 input selector.
Select "Skip" to skip this input.
HDMI 6 Use Set whether to skip the HDMI 6 input selector.
Select "Skip" to skip this input.
AUX Use Set whether to skip the AUX input selector. Select
"Skip" to skip this input.
CD Use Set whether to skip the CD input selector. Select
"Skip" to skip this input.
TV Use Set whether to skip the TV input selector. Select
"Skip" to skip this input.
PHONO Use Set whether to skip the PHONO input selector.
Select "Skip" to skip this input.
TUNER Use Set whether to skip the TUNER input selector.
Select "Skip" to skip this input.
NET Use Set whether to skip the NET input selector. Select
"Skip" to skip this input.
USB Use Set whether to skip the USB input selector. Select
"Skip" to skip this input.
BLUETOOTH Use Set whether to skip the BLUETOOTH input
selector. Select "Skip" to skip this input.
Speaker
You can make changes to the connection environment of the speakers and change the
volume level. Settings are automatically configured if you use Full Auto MCACC. This
setting cannot be selected if headphones are connected or audio is output from the
speakers of the TV.
■ Configuration
Setting Item Default Value Setting Details
Speaker
Channels
7.1.2 ch Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch",
"7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", "5.1.2
ch", "6.1.2 ch" or "7.1.2 ch" to suit the number of
speaker channels connected.
•
You can connect both surround back speakers
and height speakers if you select "6.1.2 ch"
or "7.1.2 ch". However, you can only output
audio from one of these at a time. When both
are connected, you can set which speakers to
prioritize in "Other" - "Speakers", in "AV Adjust".
Subwoofer Yes Set whether a subwoofer is connected or not.
"Yes": When subwoofer is connected
"No": When subwoofer is not connected
Height Speaker Top Middle Set the speaker type if height speakers are
connected to the HEIGHT terminals.
Select "Front High", "Top Front", "Top Middle",
"Top Rear", "Rear High", "Dolby Speaker (Front)",
"Dolby Speaker (Surr)" or "Dolby Speaker (Back)"
according to the type and layout of the connected
speakers.
•
If an item cannot be selected even though
connection is correct, check that the settings
in "Speaker Channels" matches the number of
connected channels.