> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. Basic Manual SC-LX502 AV RECEIVER Before Start ............................................................................2 What's in the box......................................................................2 Part Names .............................................................................3 Part Names .........................................................
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. What's in the box Before Start 1. Main unit (1) 2. Remote controller (RC-914R) (1), Batteries (AAA/R03) (2) 3. Speaker setup microphone (1) 0 Used during Initial Setup. 4. Indoor FM antenna (1) 5. AM loop antenna (1) 6. Power cord (1) 0 Quick Start Guide (1) 0 Basic Manual (This manual) 1 2 3 4 5 6 2 0 Connect speakers with 4 Ω to 16 Ω impedance.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. (*)You can find details in the Advanced Manual. Part Names Part Names Front Panel 1. INPUT SELECTOR dial: Switch the input to be played. 2. MCACC indicator: This lights when you have enabled the speaker calibration made with MCACC. (P26) 3.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. (*)You can find details in the Advanced Manual. 13.MASTER VOLUME 14.Í STANDBY/ON button 15.ADJUST button: Settings such as "Tone" and "Level" can be made quickly during play on the TV screen. 16.HOME button: Displays the Home. (*) 17.Cursor buttons ( / / / ) and ENTER button: Select the item with the cursors and press ENTER to confirm.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. (*)You can find details in the Advanced Manual. Rear Panel 1. COMPONENT VIDEO IN jacks: Input the AV component video signals with a component video cable. (Compatible only with 480i or 576i resolution.) 2.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. (*)You can find details in the Advanced Manual. 15.12V TRIGGER OUT A/B jack: Allows you to connect a device with 12V trigger input jack to enable link operation between the device and the unit. (*) 16.SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable. Up to two powered subwoofers can be connected.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. Installation procedure Install This unit can be used in a number of ways, depending on the layout of the speakers you are installing, and the connections made to external devices. Read the following to help make the installation process smoother.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. Step1: Speaker Layout 7.1 Channel System ＊1 ＊2 ＊3 ¢1: 22e to 30e, ¢2: 90e to 110e, ¢3: 135e to 150e 8 Front speakers output front stereo sound and a center speaker outputs center sound such as dialogs and vocals. Surround speakers create back sound field. Powered subwoofer reproduces bass sounds and creates rich sound field. This basic 5.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. Speaker B System Speaker B Speaker B With a 7.1 channel system (P8), you can connect one more set of front speakers to use as a Speaker B System. In this state, the 7.1 channel system becomes the Speaker A System and you can switch the same audio to output from A, B, or A+B. Press on the remote control (P6) and use "Other" - "Speakers" to switch.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. 5.1.2 Channel System-1 (Front High Speakers/Rear High Speakers) This is a basic 5.1 channel system consisting of front speakers, a center speaker, surround speakers, and a powered subwoofer, with the addition of front height speakers or rear high speakers, which are both types of height speakers.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. 5.1.2 Channel System-2 (Ceiling Speakers) ＊3 ＊2 ＊1 This is a basic 5.1 channel system consisting of front speakers, a center speaker, surround speakers, and a powered subwoofer, with the addition of top front speakers, top middle speakers, or top rear speakers, which are types of height speakers.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. 5.1.2 Channel System-3 (Dolby Enabled Speakers (Dolby Speakers)) ＊1 ＊2 ＊3 ¢1: 22e to 30e, ¢2: 90e to 120e, ¢3: 135e to 150e 12 This is a basic 5.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. Bi-Amping the Speakers With a 5.1 channel system, it is possible to connect front speakers that support Bi-Amping to improve the quality of the bass and treble.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. Speaker combinations 0 In any of the combinations, up to two powered subwoofers can be connected. Speaker Channels FRONT CENTER SURROUND SURROUND BACK ZONE 2 HEIGHT (Speaker B) Bi-AMP (ZONE SPEAKER) (P23) 2.1 ch (*1) (*1) (*1) 3.1 ch (*1) (*1) (*1) 4.1 ch (*1) (*1) (*1) (*1) (*1) (*1) 5.1 ch 6.1 ch (*2) 7.1 ch (*2) 2.1.2 ch (*3) 3.1.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. Step2: Connect the Speakers Standard Connections (Pages 8 to 12) 3/8˝ (10 mm) Connect 12345678 for a 7.1 channel system. Connect 1234569: for a 5.1.2 channel system. Up to two powered subwoofers can be connected. The same signal is output from each of the SUBWOOFER PRE OUT jacks. 0 You can also connect both 78 and 9:.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. Connecting with Bi-Amping Speakers (Page 13) Make sure you remove the jumper bar fitted between the woofer jacks and tweeter jacks of the front speakers. Refer to "Standard Connections (Pages 8 to 12)" (P15) to connect the center speaker, surround speakers, and powered subwoofer.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. Step3: Connect the TV & AV Components 1. Connect the TV To ARC TV For a TV that supports the ARC (Audio Return Channel) feature (*1), use an HDMI cable and connect according to illustration "a". Choose an HDMI IN jack on the TV that supports ARC when connecting. *2 Setup 0 Settings are required to use the ARC function. Select "Yes" in "5.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. 2. Connect the HDMI AV Component This is an example of connection with an AV component that has an HDMI jack.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. 3. Connect the Non-HDMI AV Component This is an example of connection with an AV component that does not have an HDMI jack. Make the connections to the AV component to match the jacks it has.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. 4. Connect the Audio Component Example of a connection with an audio component. Connect a CD player using a digital coaxial cable or an analog audio cable. You can also connect a turntable that has an MM-type cartridge to the PHONO jack. 0 If the turntable has a built-in audio equalizer, connect it to an AUDIO IN jack other than the PHONO jack.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. 5. Multi-zone Connection-1 (ZONE 2 TV) You can enjoy content from a Blu-ray Disc player on a TV equipped with an HDMI input jack in the separate room (ZONE 2) by playing a Blu-ray Disc player in the main room (where this unit is located), or play the content from another AV component.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. 6. Multi-zone Connection-2 (ZONE 2 PRE/ LINE OUT) You can enjoy 2ch audio in the separate room through speakers connected to a pre-main amplifier or power amplifier by, for example, playing a Blu-ray Disc player in 7.1ch in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2).
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. 7. Multi-zone Connection-3 (ZONE SPEAKER) You can enjoy 2ch audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio through the speakers in the separate room (ZONE 2).
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. 8. Connect Other Cables Antenna Hookup Move the antenna around while playing the radio to find the position with the best reception. Use a thumb tack or similar to attach the indoor FM antenna to a wall. Network Hookup a d Connect this unit to the network using wired LAN or Wi-Fi (wireless LAN).
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. Initial Setup with Auto Start-up Wizard Initial Setup Initial Setup Starts Automatically 1 When you turn the unit on for the first time after purchasing it, Initial Setup is automatically shown on the TV to enable you to make settings required for startup using simple operations following onscreen guidance. 1. Switch the input on the TV to that assigned to the unit.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. ∫ 1. Full Auto MCACC Place the supplied speaker setup microphone in the listening position, measure the test tones emitted by the speakers, then the unit automatically sets the optimum volume level for each speaker, the crossover frequencies, and the distance from the listening position.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. BLUETOOTH® Playback AV Component Playback Playback 1 2 1 2 3 INPUT Pioneer SC-LX502 XXX TV Basic Operations You can play the audio from AV components such as Blu-ray Disc players through this unit. 0 When a TV is connected to the HDMI OUT SUB jack, press (P6) on the remote controller and use "Other" - "HDMI Out" to switch between MAIN and SUB.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. Network Functions 1 2 3 INPUT TV Basic Operations By connecting this unit to the network you can enjoy internet radio services such as TuneIn, streaming from Spotify Connect, and wireless playback using the Chromecast built-in feature and AirPlay®.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. USB Storage Device 1 2 3 4 INPUT TV Basic Operations You can play music files stored on a USB storage device. Perform the following procedure when the unit is on. 1. Switch the input on the TV to that assigned to the unit. 2. Plug your USB storage device with the music files into the USB port on the front panel of this unit. 3.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. Listening to the AM/FM Radio 1 You can receive AM and FM radio stations on this unit with the built-in tuner. Perform the following procedure when the unit is on. ∫ Tuning into a Radio Station Tuning Automatically 1. Press TUNER (a) on the remote controller repeatedly to select either "AM" or "FM" on the display. 2.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. 1 2 3 ∫ Using RDS (European, Australian and Asian models) RDS stands for Radio Data System and is a method of transmitting data in FM radio signals. In regions using RDS, the radio station name is displayed when you tune into a radio station broadcasting program information. When you press on the remote controller in this state, you can use the following functions.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. Multi-zone 1 Basic Operations You can enjoy audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2). 0 DSD and Dolby TrueHD audio signals are not output to ZONE 2 when selected with the "NET" or "USB" input selector.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. MULTI-ZONE MUSIC If you press MULTI-ZONE MUSIC on the main unit while playback is being performed in the main room, "Z2" on the display lights, the MULTI-ZONE MUSIC is turned on, and the playback source in the separate room is switched to the same source immediately. 0 The sources that can be played in ZONE 2 can be played in all rooms.
> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual Troubleshooting | Supplementary Information, etc. Listening Mode AUTO/DIRECT button (a) STEREO button (d) You can select the "Stereo" mode to playback only from the front speakers and subwoofer. c Press repeatedly and the listening modes suited to the input signal are switched between "Auto Surround", "Direct", and "Pure Direct".
This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft. Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, Dolby Vision and the double-D symbol are trademarks of Dolby Laboratories. Windows 7, Windows Media, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
1-10-5 Yokoami, Sumida-ku, Tokyo 130-0015 JAPAN 18 PARK WAY, UPPER SADDLE RIVER, NEW JERSEY 07458, U.S.A.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Advanced Manual SC-LX502 AV RECEIVER Specifications General Specifications............................................................. 2 About HDMI ............................................................................. 4 Playback from USB storage devices ....................................... 5 Playback from the Music Server ..............................
>>Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. General Specifications ■ Amplifier Section Rated Output Power (FTC) (North American) With 8 Ω loads, both channels driven, at 1 kHz; rated 120 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output.
>>Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. operating system, software application, etc. ■ Descriptions required by the RE Directive of the European Union (EU) Maximum radio-frequency power transmitted in the frequency band(s) (European) 2400 MHz - 2483.5 MHz (20 dBm (e.i.r.p)) 5150 MHz - 5350 MHz (22 dBm (e.i.r.p)) 5470 MHz - 5725 MHz (22 dBm (e.i.r.
>>Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. About HDMI ■ Compatible functions HDMI (High Definition Multimedia Interface) is a digital interface standard for connecting TVs, projectors, Bluray Disc/DVD players, set-top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components.
>>Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Playback from USB storage devices ■ USB Storage Device Requirements • This unit can use USB storage devices that comply with the USB mass storage device class standard. • FAT16 or FAT32 file system format. • If the USB storage device has been partitioned, each section will be treated as an independent device.
>>Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Playback from the Music Server ■ Supported Audio Formats Apple Lossless (.m4a/.mp4/.M4A/.MP4): • Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz • Quantization bit: 16 bit, 24 bit This unit supports the following music file formats. Remote play of FLAC and DSD is not supported. DSD (.dsf/.dff/.DSF/.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Input/Output Assign System Setup The unit allows you to configure advanced settings to provide you with an even better experience. Operation: Use the on-screen displays (OSD) that appear on the TV to make the settings. on the remote controller to display the Home screen, then select System Setup Press with the cursors on the remote controller and press ENTER.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Setting Item Default Value Setting Details Super Resolution 2 When you have set "1080p -> 4K Upscaling" to "Auto", you can select the degree of video signal correction from "Off" and between "1" (weak) and "3" (strong). Zone 2 HDMI Not Use Make the setting when you output to the Zone 2 TV connected to the HDMI OUT ZONE 2/SUB jack.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Setting Item Default Value Setting Details Setting Item Default Value Setting Details CBL/SAT VIDEO 1 "COMPONENT": Assign the COMPONENT VIDEO IN jacks to the CBL/SAT input selector. "VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN jack to the CBL/SAT input selector.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. 10 Setting Item Default Value Setting Details GAME Use Set whether to skip the GAME input selector. Select "Skip" to skip this input. STRM BOX Use Set whether to skip the STRM BOX input selector. Select "Skip" to skip this input. HDMI 5 Use Set whether to skip the HDMI 5 input selector. Select "Skip" to skip this input.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Setting Item Default Value Setting Details Setting Item Default Value Setting Details Zone Speaker No Set the connection of speakers to Zone 2 speaker terminals.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Setting Item Default Value Setting Details Setting Item Default Value Setting Details Surround Back Small Set the low range capabilities for each channel by setting either small or large.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. ■ Channel Level Setting Item Default Value Setting Details Front Left 0.0 dB Select a value between "−12.0 dB" and "＋12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Center 0.0 dB Select a value between "−12.0 dB" and "＋12.0 dB" (in 0.5 dB increments).
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. ■ Volume Audio Adjust Make advanced settings such as those related to multiplex audio or those related to the volume of this unit. Setting Item Default Value Setting Details Mute Level − dB Set the volume lowered from the listening volume when muting is on. Select a value from "− dB", "−40dB", and "−20dB".
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Source Make settings for input sources, such as volume difference adjustments for each input selector for the connected equipment. ■ Input Volume Absorber Adjust the volume level difference between the devices connected to the unit. Select the input selector to configure. Setting Item Default Value Setting Details Input Volume Absorber 0.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Setting Item Default Value Setting Details Fixed PCM Off Select whether to fix input signals to PCM (except multi-channel PCM) when you have selected "HDMI", "COAXIAL", or "OPTICAL" in the "Audio Select" setting. Set this item to "On" if noise is produced or truncation occurs at the beginning of a track when playing PCM sources. Select "Off" normally.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Setting Item Default Value Setting Details Setting Item Default Value Setting Details HDMI Standby Through Off When this is set to anything other than "Off", you can play the video and audio of an HDMI connected player on the TV even if the unit is in standby mode. Only "Auto" and "Auto (Eco)" can be selected if "HDMI CEC" is set to "On".
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. ■ Power Management Setting Item Default Value Setting Details Sleep Timer Off Allows the unit to enter standby automatically when the specified time elapses. Select a value from "30 minutes", "60 minutes", and "90 minutes". "Off": Does not turn the unit to standby automatically.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. ■ 12V Trigger A Set when outputting the control signal (maximum 12 V/100 mA) through the 12V TRIGGER OUT A jack. Different settings can be set for each input selector. You can enable power link operation when you connect the unit and the external devices equipped with 12V trigger input jack.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Setting Item Default Value Setting Details Setting Item Default Value Setting Details USB Off Set the 12V trigger output setting to each input. "Off": No output "Main": Output when "USB" is selected as input source for the main room. "Zone2": Output when "USB" is selected as input source for ZONE2.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Setting Item Default Value Setting Details PHONO Off Set the 12V trigger output setting to each input. "Off": No output "Main": Output when "PHONO" is selected as input source for the main room. "Zone2": Output when "PHONO" is selected as input source for ZONE2.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. ■ 2. Remote Play Zone 22 Miscellaneous Setting Item Default Value Setting Details Remote Play Zone Auto When playing using AirPlay or Spotify Connect, or when using the Music Server feature to play remotely from your PC, you can set whether to play in the main room (where this unit is) or in a separate room (ZONE 2).
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. ■ Remote ID ■ Firmware Update Setting Item Default Value Setting Details Setting Item Default Value Setting Details Remote ID 1 Select an ID for the unit's remote controller from "1", "2", and "3" to prevent interference between the unit and other Pioneer components that are installed in the same room.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Full Auto MCACC MCACC Setup the speakers automatically or make desired changes to the equalizer. You can also check the values set currently for each speaker setting. Operation: Use the on-screen displays (OSD) that appear on the TV to make the settings.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Manual MCACC ■ EQ Adjust If you perform Full Auto MCACC then settings are automatic, but you can also adjust the output volume of the range of each connected speaker to suit your own preferences. You can adjust the volume of the different sound ranges for each of the speakers. You can set three different equalizers in Preset 1 to 3.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Setting Item Default Value Setting Details Setting Item Default Value Setting Details Height Left 0 dB After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "−12.0 dB" and "＋12.0 dB" with / .
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Setting Item Default Value Setting Details Surround Left 0 dB After selecting the speaker frequency from between "63 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "−12.0 dB" and "＋12.0 dB" with / . • "63 Hz" can only be selected when this speaker is set to "Large" in "System Setup" - "Speaker" "Crossover".
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Network Network/Bluetooth Make settings related to network connections and BLUETOOTH. Operation: Use the on-screen displays (OSD) that appear on the TV to make the settings. on the remote controller to display the Home screen, select Network/Bluetooth Press with the cursors on the remote controller, then press ENTER.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Setting Item Default Value Setting Details Friendly Name Pioneer SCChange the device name for this unit which is LX502 XXXXXX shown on other devices connected to the network to an easily recognized name. 1. Press ENTER to display the Edit screen. 2. Select a character or symbol with the cursors and press ENTER. Repeat it to input 31 or less characters.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. • Wait for a while if "Network" cannot be selected. It will appear when the network feature is started. Bluetooth Setting Item Default Value Setting Details Bluetooth On Select whether or not to use the BLUETOOTH function. "On": Enables connection with a BLUETOOTH wireless technology enabled device by using the BLUETOOTH function.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. AV Adjust You can quickly adjust settings you frequently use, such as tone adjustments, etc. Operation: You can make the settings on the TV screen while playing on the remote controller to display something. Press the AV Adjust menu.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. • It cannot be set if the listening mode is Direct or Pure Direct. • The setting cannot be used in the following cases.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Web Setup You can make the settings for network features for this unit in an internet browser on a PC, smartphone, etc. on the remote controller to display the Home 1. Press screen. 2. Select "Network/Bluetooth" - "Network" with the cursors, then take a note of the IP address displayed in "IP Address". 3.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Control Function Settings You can enable the control functions between the unit and external devices. Special devices or cable connections are necessary to enable the functions. For more information about installation, contact a store specializing in these products.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Firmware Update The updating function on this unit This unit has functionality to update the firmware (the system software) over a network or by the USB port. This enables us to make improvements to a variety of operations and to add features. • For the latest information on updates, visit our company's website.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. System Setup Input/Output Assign • If "Firmware Update" is grayed out and cannot be selected, wait for a while until it starts up. • You will not be able to select "Update via NET" if there is nothing to update. 3. Press ENTER with "Update" selected to start update. • During the update, the TV screen may go black depending on the updated program.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. • Make sure to copy the unzipped files. 4. Connect the USB storage device to the USB port of the unit. • If you connect a USB hard disk drive to the USB port of the unit, we recommend that you use its AC adapter to power it. • If the USB storage device has been partitioned, each section will be treated as an independent device. 5. Press on the remote controller.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Selecting Listening Modes You can change the listening mode during play by pressing repeatedly "AUTO/DIRECT", "SURR", or "STEREO". ■ AUTO/DIRECT button ■ SURR button Press repeatedly and the listening modes suited to the input signal are switched between "Auto Surround", "Direct", and "Pure Direct".
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Mode suitable for movies with a lot of action scenes. by Dolby Laboratories, Inc. widely adopted for use in movie production. It is also a standard audio format on DVD-Video and Blu-ray Discs. It is possible to record a maximum of 5.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. The DTS 96/24 format is an optional audio format on DVD-Video and Blu-ray Discs. It enables recording of 5.1 channels; two front channels, a center channel, two surround channels, and the LFE channel dedicated to the bass region (sound elements for the subwoofer).
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. ■ Stereo In this mode, sound is output from the front left and right speakers and subwoofer. ■ Unplugged Suitable for acoustic instruments, vocals and jazz. This mode emphasizes the front stereo image, giving the impression of being right in front of the stage.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. ■ Selectable listening modes Selectable Listening Modes Input Format Listening Mode Analog Stereo Input Format Listening Mode PCM Music files (except DSD/ Dolby TrueHD) Stereo Mono You can select a variety of listening modes to suit the audio format of the signal being input. • The Stereo mode can be selected with any audio format.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Multich PCM Stereo DSD • You cannot select any mode other than Pure Direct if the sampling rate is 11.2 MHz. Stereo Dolby Atmos • You can select the Dolby Digital Plus or Dolby TrueHD listening modes if surround back speakers or height speakers are not connected.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Dolby D Stereo Dolby D+ Stereo Dolby TrueHD Stereo Dolby D Dolby D+ 1 2 Dolby Surround Dolby Surround Classical Classical Classical 3 Ent.Show Drama Action Ent.Show 3 Drama 3 Action Sports 44 Action Rock/Pop 3 Sports 3 3 3 Ext.Stereo Ext.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS Stereo DTS 96/24 Stereo DTS Express Stereo DTS DTS 96/24 DTS Express DTS Neural:X DTS Neural:X DTS Neural:X Classical Classical Classical 1 2 1 2 3 Unplugged Ent.Show Drama Action Ent.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS-HD HR Stereo DTS-HD MSTR Stereo DTS-ES Stereo DTS-HD HR 1 2 DTS Neural:X Classical Ent.Show Drama 3 Ent.Show Drama 45 Action 1 2 3 4 5 6 46 Classical Ent.Show 45 Drama Action Cannot be selected when the input format is 2 ch.
>> Specifications >> Advanced Setup >> Listening Modes >> Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Input Format Listening Mode DTS:X Stereo DTS:X Classical 1 Unplugged Ent.Show Drama 1 1 1 AdvancedGame Action 1 1 Rock/Pop Sports 1 1 Ext.Stereo 2 Ext.Mono 2 F.S.Surround 1 2 Surround speakers or height speakers need to be installed. A center speaker, surround speakers, or height speakers need to be installed.
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. ■ Internet radio service menus LINKS Internet Radio You can use internet radio services such as TuneIn Radio, Pandora, Deezer, and TIDAL by connecting this unit to a network that has an internet connection. • Depending on the internet radio service, the user may need to register from their computer first.
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Spotify Spotify Connect play is possible by connecting this unit to the same network as a smart phone or tablet. • To play Spotify Connect, you need to install the Spotify application on your smartphone or tablet. You also need to create a Spotify premium account. • Refer to the following for Spotify settings: www.spotify.
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. device. AirPlay® You can wirelessly enjoy the music files on an iPhone®, iPod touch®, or iPad® connected to the same access point as this unit. • Update the OS version on your iOS device to the latest version. • There may be some differences in the operations screens and how operations are performed on the iOS device depending on the iOS version.
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Music Server Overview Streaming play of music files stored on PCs or NAS devices connected to the same network as this unit is supported. • The network servers this unit is compatible with are those PCs with players installed that have the server functionality of Windows MediaR Player 11 or 12, or NAS that are compatible with home network functionality.
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. levels deep. • Depending on the media server, the unit may not recognize it, or may not be able to play its music files. Controlling Remote Playback from a PC You can use this unit to play music files stored on your PC by operating the PC inside your home network. The unit supports remote playback with Windows MediaR Player 12.
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Supplementary information for player functions Due to firmware (the software for the system) updates after you make your purchase or firmware changes during production of the product, there may be additions or changes to the features available compared to what is in the instruction manual.
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. LINKS Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/ off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device.
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. minute and then turn the unit on again. If the same symptoms such as being unable to turn the unit on happen repeatedly, unplug the power cord from the wall outlet immediately and contact the dealer or our company's support.
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. • An audio cable may be picking up interference. Try repositioning your cables. ■ The beginning of audio received by an HDMI IN cannot be heard • Since it takes longer to identify the format of an HDMI signal than it does for other digital audio signals, audio output may not start immediately.
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. Video • Confirm that the connection between the output jack on the device and the input jack on this unit is correct. • Make sure that none of the connecting cables are bent, twisted, or damaged. • When the TV image is blurry or unclear, power code or connection cables of the unit may have interfered.
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. BLUETOOTH function • Try plugging/unplugging the power of the unit and try turning on/off the BLUETOOTH wireless technology enabled device. Re-startup of the BLUETOOTH wireless technology enabled device may be effective. • The BLUETOOTH wireless technology enabled devices must support the A2DP profile.
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. • When using a PC, only music files registered in the Windows MediaR Player library can be played. ■ Playback stops while listening to music files on the network server • Make sure the network server is compatible with this unit.
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. necessary. • If the unit is installed in a rack or cabinet with coloredglass doors or if the doors are closed, the remote controller may not work reliably. • After operating the Multi-zone function (for compatible models only), the remote controller may have switched to the mode for operating ZONE output audio.
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. the space between the AV receiver and the wireless LAN device. • We assume no responsibility whatsoever for any damages resulting from the use of this apparatus except in the cases deemed acceptable under the applicable laws and regulations. • Operation in all environment is not guaranteed for wireless LAN.
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. LINKS Supplementary Information Due to firmware (the software for the system) updates after you make your purchase or firmware changes during production of the product, there may be additions or changes to the settings and operation available compared to what is in the instruction manual.
>>Specifications >>Advanced Setup >>Listening Modes >>Network Functions >>Basic Manual Troubleshooting | Supplementary Information, etc. License and Trademark Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, Dolby Vision and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc.
1-10-5 Yokoami, Sumida-ku, Tokyo 130-0015 Japan 18 PARK WAY, UPPER SADDLE RIVER, NEW JERSEY 07458, U.S.A.
