Operation Manual

Basic Setup

About the Home Menu

This receiver’s Home Menu (HOME MENU) can be used to make various settings and to check and adjust items

that have been set.

! With factory default settings, the Home Menu screen will be output from all HDMI output terminals

and displayed on any TV connected via HDMI cable. You can change where the screen is output in the

MAIN/HDZONE (page 95 ) and HDMI output (page 72 ) settings.

1 Press MAIN RECEIVER to switch the remote control to the receiver operation mode.

2 To display the Home Menu screen, press HOME MENU on the remote control.

1. Advanced MCACC

2. MCACC Data Check

3. Data Management

4. System Setup

5. Network Information

6. Operation Mode Setup

Exit Return

HOME MENU

A/V RECEIVER

A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the

screens and select menu items. Press RETURN to exit the current menu.

The top level in the Home Menu is as shown below. Refer to the respective explanations to set, check and adjust

as necessary.

! Advanced MCACC – Use this to make automatic settings and detailed manual settings for the surround

sound. For details, see Making receiver settings from the Advanced MCACC menu on page 83 .

! MCACC Data Check – This displays the Advanced MCACC measurement results. Use it to check the MCACC

memory. For details, see Checking MCACC Data on page 87 .

! Data Management – Use this to manage the data in the MCACC memory. For details, see Data Management

on page 88 .

! System Setup – Use this to make various settings related to this system. For details, see Making receiver set-

tings from the System Setup menu on page 90 .

! Network Information – The setting status of the network-related items can be checked. For detail, see

Checking the Network Information on page 93 .

! Operation Mode Setup – Use this to select this receiver’s operation mode. For details, see Operation Mode

Setup on page 42 .