Operation Manual

32
Connecting your equipment
03
MULTI-ZONE setup using speaker terminals (ZONE 2)
You must select ZONE 2 in Speaker system setting (page 90 ) to use this setup.
% Connect a pair of speakers to the surround back speaker terminals.
You should have a pair of speakers attached to the surround back speaker terminals as shown below.
(Single)
SURROUND BACK
RL
R
Sub zone (ZONE 2) Main zone
L
(Single)
SURROUND BACK
RL
Secondary MULTI-ZONE setup (ZONE 3)
SC-2024 only
% Connect a separate amplifier to the AUDIO ZONE 3 OUT jacks on this receiver.
You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
ZONE 3
OUT
ZONE 3
OUT
RL
AUDIO IN
Sub zone (ZONE 3) Main zone
MULTI-ZONE setup using HDMI terminal (HDZONE)
Important
! The settings must be changed at ZONE Setup in order to use the HDZONE function (page 95 ).
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see HDMI
Setup on page 64 .
% Connect a separate receiver to the HDMI OUT 2 (HDZONE) terminal on this receiver.
Connect speakers and a TV to the HDZONE receiver as shown on the illustration below.
OUT 2
(HDZONE)
OUT 1
(CONTROL)
SELECTABLE
OUT 2
(HDZONE)
OUT 1
(CONTROL)
SELECTABLE
HDMI IN
Sub zone (HDZONE) Main zone