Operation Manual

29
Connecting your equipment
03
Connecting other audio components
This receiver has both digital and analog inputs, allowing you to connect audio components for playback.
When you set up the receiver you’ll need to tell the receiver which input you connected the component to (see
also The Input Setup menu on page 41 ).
HDMI
LAN
(
10/100
)
OUT 2
(HDZONE)
OUT 1
(CONTROL)
DC OUTPUT
for WIRELESS LAN
(
OUTPUT 5 V
0.6 A MAX
)
(
OUTPUT 5 V
0.9 A MAX
)
OPTICAL
COAXIAL
ASSIGN-
ABLE
SELECTABLE
ASSIGNABLE
1
-
6
ASSIGNABLE
IN
1
(
CD
)
IN
1
(
DVD
)
BD IN IN
2
(
SAT/CBL
)
IN
3
(
DVR/BDR
)
IN
4
IN
6
MHL
IN
1
(
TV
)
IN
2
(
DVR/BDR
)
IN
1
(
DVD
)
IN
2
(
SAT/CBL
)
ASSIGNABLE
ASSIGNABLE
IN
1
(
CD
)
HDMI
LAN
(
10/100
)
OUT 2
(HDZONE)
OUT 1
(CONTROL)
DC OUTPUT
for WIRELESS LAN
(
OUTPUT 5 V
0.6 A MAX
)
(
OUTPUT 5 V
0.9 A MAX
)
OPTICAL
COAXIAL
ASSIGN-
ABLE
SELECTABLE
ASSIGNABLE
1
-
6
IN
1
(
DVD
)
BD IN IN
2
(
SAT/CBL
)
IN
3
(
DVR/BDR
)
IN
4
IN
6
MHL
IN
1
(
TV
)
IN
2
(
DVR/BDR
)
IN
1
(
DVD
)
IN
2
(
SAT/CBL
)
ASSIGNABLE
DIGITAL OUT
COAXIALOPTICAL
ANALOG
RL
AUDIO OUT
CD player, etc.
Select one
! If your turntable has line-level outputs (i.e., it has a built-in phono pre-amp), connect it to the ANALOG IN 1
(CD) inputs instead.
Connecting additional amplifiers
This receiver has more than enough power for any home use, but it’s possible to add additional amplifiers to every
channel of your system using the pre-outs. Make the connections shown below to add amplifiers to power your
speakers.
PRE OUT
SURROUND SURR BACK
F WIDE
F HEIGHT/
(Single)
FRONT CENTER
SUBWOOFER
1
2
L
R
PRE OUT
SURROUND SURR BACK F WIDE
F HEIGHT/
(Single)
FRONT CENTER
SUBWOOFER
1
2
L
R
R
L
ANALOG
INPUT
R
L
ANALOG
INPUT
R
L
ANALOG
INPUT
ANALOG
INPUT
ANALOG
INPUT
R
L
ANALOG
INPUT
Front channel
amplifier
Center channel amplifier
(mono) (SC-2024 only)
Surround channel
amplifier (SC-2024 only)
Front height or Front wide
channel amplifier
(SC-2024 only)
Surround back channel
amplifier (SC-2024 only)
Powered
subwoofer 2
ANALOG
INPUT
Powered
subwoofer 1
! If you’re not using a subwoofer, change the front speaker setting (see Speaker Setting on page 87 ) to
LARGE.
! You can use the additional amplifier on the surround back channel pre-outs for a single speaker as well. In this
case plug the amplifier into the left (SURROUND BACK L (Single)) terminal only.
! The sound from the surround back terminals will depend on how you have configured the Speaker system set-
ting on page 90 .
! If you have two subwoofers, the second subwoofer can be connected to the SUBWOOFER 2 terminal.
Connecting two subwoofers increases the bass sound to achieve more powerful sound reproduction. In this
case, the same sound is output from the two subwoofers.
! To hear sound only from the pre-outs, switch the speaker terminals to SP: OFF (page 72 ) or simply discon-
nect any speakers that are connected directly to the receiver.